NAME
  bs11_config - Configuration of BS-11 BTS via RS232

SYNOPSIS
  bs11_config [options] [command]

DESCRIPTION
 bs11_config is a small commandline program that can be used to configure the BS-11? BTS using its RS232 link.

 It can perform a subset of the functions that are typically performed using the Siemens LMT (Local Maintenance Terminal) software, such as

  -  querying some essential configuration values
  -  creating and deleting TRX1 objects
  -  download of SAFETY LOAD software
  -  download of BTS software
  -  creating an initial configuration (such as creating BBSIG,CCLK,PA,... objects)
  -  setting the Tx output power of the RF amplifier 

 It is part of the OpenBSC base station controller software from Osmocom.

OPTIONS
    -h,--help           Print this help text
    -p,--port </dev/ttyXXX>     Specify serial port
    -s,--software <file>        Specify Software file
    -S,--safety <file>      Specify Safety Load file
    -d,--delay <ms>         Specify delay in milliseconds
    -D,--disconnect         Disconnect BTS from BSC
    -w,--win-size <num>     Specify Window Size
    -f,--forced         Force Software Load

SUPPORTED COMMANDS
    query           Query the BS-11 about serial number and configuration
    disconnect      Disconnect A-bis link (go into administrative state)
    resconnect      Reconnect A-bis link (go into normal state)
    restart         Restart the BTS
    software        Download Software (only in administrative state)
    create-trx1     Create objects for TRX1 (Danger: Your BS-11 might overheat)
    delete-trx1     Delete objects for TRX1
    pll-e1-locked       Set the PLL to be locked to E1 clock
    pll-standalone      Set the PLL to be in standalone mode
    pll-setvalue <value>    Set the PLL set value
    pll-workvalue <value>   Set the PLL work value
    oml-tei         Set OML E1 TS and TEI
    bport0-star     Set BPORT0 line config to star
    bport0-multidrop    Set BPORT0 line config to multidrop
    bport1-multidrop    Set BPORT1 line config to multidrop
    create-bport1       Create BPORT1 object
    delete-bport1       Delete BPORT1 object


SEE ALSO
  isdnsync(1), osmo-bsc(1)

AUTHOR
  This manual page was written by Ruben Undheim <ruben.undheim@gmail.com> for the Debian project (and may be used by others).



