/testing/guestbin/swan-prep --x509
Preparing X.509 files
north #
 ipsec start
Redirecting to: [initsystem]
north #
 ../../guestbin/wait-until-pluto-started
north #
 ipsec auto --add northnet-eastnet-nat
"northnet-eastnet-nat": added IKEv1 connection
north #
 ipsec whack --impair suppress_retransmits
north #
 echo "initdone"
initdone
north #
 ipsec auto --up northnet-eastnet-nat
"northnet-eastnet-nat" #1: initiating IKEv1 Main Mode connection
"northnet-eastnet-nat" #1: sent Main Mode request
"northnet-eastnet-nat" #1: sent Main Mode I2
"northnet-eastnet-nat" #1: I am sending my cert
"northnet-eastnet-nat" #1: I am sending a certificate request
"northnet-eastnet-nat" #1: sent Main Mode I3
"northnet-eastnet-nat" #1: Peer ID is DER_ASN1_DN: 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
"northnet-eastnet-nat" #1: authenticated peer certificate 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org' and 3nnn-bit RSA with SHA1 signature issued by 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=Libreswan test CA for mainca, E=testing@libreswan.org'
"northnet-eastnet-nat" #1: ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA2_256 group=MODP2048}
"northnet-eastnet-nat" #2: initiating Quick Mode IKEv1+RSASIG+ENCRYPT+TUNNEL+PFS+UP+IKE_FRAG_ALLOW+ESN_NO+ESN_YES {using isakmp#1 msgid:MSGID proposal=AES_CBC-HMAC_SHA1_96, AES_CBC-HMAC_SHA2_512_256, AES_CBC-HMAC_SHA2_256_128, AES_GCM_16_128-NONE, AES_GCM_16_256-NONE, 3DES_CBC-HMAC_SHA1_96, 3DES_CBC-HMAC_SHA2_512_256, 3DES_CBC-HMAC_SHA2_256_128 pfsgroup=MODP2048 192.0.3.0/24===192.0.2.0/24}
"northnet-eastnet-nat" #2: sent Quick Mode request
"northnet-eastnet-nat" #2: IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_CBC_128-HMAC_SHA1_96 DPD=passive}
north #
 echo done
done
north #
 # should not match
north #
 grep 'Result using RFC 3947' /tmp/pluto.log || echo "OK - did not find a match"
OK - did not find a match
north #
 # should not show udp encap
north #
 ipsec _kernel policy
src 192.0.2.0/24 dst 192.0.3.0/24
	dir fwd priority PRIORITY ptype main
	tmpl src 192.1.2.23 dst 192.1.3.33
		proto esp reqid REQID mode tunnel
src 192.0.2.0/24 dst 192.0.3.0/24
	dir in priority PRIORITY ptype main
	tmpl src 192.1.2.23 dst 192.1.3.33
		proto esp reqid REQID mode tunnel
src 192.0.3.0/24 dst 192.0.2.0/24
	dir out priority PRIORITY ptype main
	tmpl src 192.1.3.33 dst 192.1.2.23
		proto esp reqid REQID mode tunnel
north #
 ipsec _kernel state
src 192.1.3.33 dst 192.1.2.23
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	replay-window 0 flag af-unspec
	auth-trunc hmac(sha1) 0xHASHKEY 96
	enc cbc(aes) 0xENCKEY
src 192.1.2.23 dst 192.1.3.33
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	replay-window 0 flag af-unspec
	auth-trunc hmac(sha1) 0xHASHKEY 96
	enc cbc(aes) 0xENCKEY
	anti-replay esn context:
	 seq-hi 0x0, seq 0xXX, oseq-hi 0x0, oseq 0xXX
	 replay_window 128, bitmap-length 4
	 00000000 00000000 00000000 XXXXXXXX 
north #
