/testing/guestbin/swan-prep --nokeys
Creating empty NSS database
west #
 ipsec start
Redirecting to: [initsystem]
west #
 ../../guestbin/wait-until-pluto-started
west #
 ipsec auto --add west
"west": ikev2=no has been replaced by keyexchange=ikev1
"west": added IKEv1 connection
west #
 echo "initdone"
initdone
west #
 ipsec whack --impair revival
west #
 ipsec whack --impair timeout_on_retransmit
west #
 ipsec whack --impair v1_emit_quick_id:0
west #
 ipsec up west
"west" #1: initiating IKEv1 Main Mode connection
"west" #1: sent Main Mode request
"west" #1: sent Main Mode I2
"west" #1: sent Main Mode I3
"west" #1: Peer ID is IPV4_ADDR: '192.1.2.23'
"west" #1: ISAKMP SA established {auth=PRESHARED_KEY cipher=AES_CBC_128 integ=HMAC_SHA1 group=MODP1536}
"west" #2: initiating Quick Mode IKEv1+PSK+ENCRYPT+TUNNEL+UP+IKE_FRAG_ALLOW+ESN_NO+ESN_YES {using isakmp#1 msgid:MSGID proposal=AES_CBC-HMAC_SHA1_96, AES_CBC-HMAC_SHA2_512_256, AES_CBC-HMAC_SHA2_256_128, AES_GCM_16_128-NONE, AES_GCM_16_256-NONE, 3DES_CBC-HMAC_SHA1_96, 3DES_CBC-HMAC_SHA2_512_256, 3DES_CBC-HMAC_SHA2_256_128 pfsgroup=no-pfs 192.0.1.0/24===192.0.2.0/24}
"west" #2: IMPAIR: skipping Quick Mode client initiator ID (IDci)
"west" #2: IMPAIR: skipping Quick Mode client responder ID (IDcr)
"west" #2: sent Quick Mode request
"west" #2: IMPAIR: retransmit so timing out SA (may retry)
"west" #2: connection is supposed to remain up; revival attempt 1 scheduled in 0 seconds
"west" #2: IMPAIR: revival: skip scheduling revival event
"west" #2: deleting IPsec SA (QUICK_I1) and NOT sending notification
west #
 ipsec whack --impair v1_emit_quick_id:1
west #
 ipsec up west
"west" #3: initiating Quick Mode IKEv1+PSK+ENCRYPT+TUNNEL+UP+IKE_FRAG_ALLOW+ESN_NO+ESN_YES {using isakmp#1 msgid:MSGID proposal=AES_CBC-HMAC_SHA1_96, AES_CBC-HMAC_SHA2_512_256, AES_CBC-HMAC_SHA2_256_128, AES_GCM_16_128-NONE, AES_GCM_16_256-NONE, 3DES_CBC-HMAC_SHA1_96, 3DES_CBC-HMAC_SHA2_512_256, 3DES_CBC-HMAC_SHA2_256_128 pfsgroup=no-pfs 192.0.1.0/24===192.0.2.0/24}
"west" #3: IMPAIR: skipping Quick Mode client responder ID (IDcr)
"west" #3: sent Quick Mode request
"west" #3: IMPAIR: retransmit so timing out SA (may retry)
"west" #3: connection is supposed to remain up; revival attempt 2 scheduled in 5 seconds
"west" #3: IMPAIR: revival: skip scheduling revival event
"west" #3: deleting IPsec SA (QUICK_I1) and NOT sending notification
west #
 ipsec whack --impair v1_emit_quick_id:3
west #
 ipsec up west
"west" #4: initiating Quick Mode IKEv1+PSK+ENCRYPT+TUNNEL+UP+IKE_FRAG_ALLOW+ESN_NO+ESN_YES {using isakmp#1 msgid:MSGID proposal=AES_CBC-HMAC_SHA1_96, AES_CBC-HMAC_SHA2_512_256, AES_CBC-HMAC_SHA2_256_128, AES_GCM_16_128-NONE, AES_GCM_16_256-NONE, 3DES_CBC-HMAC_SHA1_96, 3DES_CBC-HMAC_SHA2_512_256, 3DES_CBC-HMAC_SHA2_256_128 pfsgroup=no-pfs 192.0.1.0/24===192.0.2.0/24}
"west" #4: IMPAIR: adding bonus Quick Mode client ID
"west" #4: sent Quick Mode request
"west" #4: IMPAIR: retransmit so timing out SA (may retry)
"west" #4: connection is supposed to remain up; revival attempt 3 scheduled in 10 seconds
"west" #4: IMPAIR: revival: skip scheduling revival event
"west" #4: deleting IPsec SA (QUICK_I1) and NOT sending notification
west #
 echo done
done
west #
 grep 'malformed Quick Mode message' /tmp/pluto.log
west #
 ipsec _kernel state
west #
 ipsec _kernel policy
west #
