#! /bin/sh

# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13 
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.

# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_default_prefix=/usr/local
ac_help="$ac_help
  --enable-debug          enables debug symbols [default=no]"
ac_help="$ac_help
  --disable-debug         disables debug output and debug symbols [default=no]"
ac_help="$ac_help
  --enable-strict         compiles with strict compiler options (may not work!)"
ac_help="$ac_help
  --enable-profile        creates profiling infos [default=no]"
ac_help="$ac_help
  --enable-final          build size optimized apps (experimental - needs lots of memory)"
ac_help="$ac_help
  --disable-closure       don't delay template instantiation"
ac_help="$ac_help
  --enable-shared[=PKGS]  build shared libraries [default=yes]"
ac_help="$ac_help
  --enable-static[=PKGS]  build static libraries [default=no]"
ac_help="$ac_help
  --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
ac_help="$ac_help
  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
ac_help="$ac_help
  --disable-libtool-lock  avoid locking (might break parallel builds)"
ac_help="$ac_help
  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
  --enable-embedded       link to Qt-embedded, don't use X"
ac_help="$ac_help
  --with-xinerama        enable support for Xinerama "
ac_help="$ac_help
  --disable-mt             link to non-threaded Qt (deprecated)"
ac_help="$ac_help
  --enable-kernel-threads Enable the use of the LinuxThreads port on FreeBSD/i386 only."
ac_help="$ac_help
  --disable-threading     disables threading even if libpthread found "
ac_help="$ac_help
  --with-extra-includes=DIR
                          adds non standard include paths"
ac_help="$ac_help
  --with-extra-libs=DIR   adds non standard library paths"
ac_help="$ac_help
  --with-qt-dir=DIR       where the root of Qt is installed "
ac_help="$ac_help
  --with-qt-includes=DIR  where the Qt includes are. "
ac_help="$ac_help
  --with-qt-libraries=DIR where the Qt library is installed."

# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'

# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12

ac_prev=
for ac_option
do

  # If the previous option needs an argument, assign it.
  if test -n "$ac_prev"; then
    eval "$ac_prev=\$ac_option"
    ac_prev=
    continue
  fi

  case "$ac_option" in
  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
  *) ac_optarg= ;;
  esac

  # Accept the important Cygnus configure options, so we can diagnose typos.

  case "$ac_option" in

  -bindir | --bindir | --bindi | --bind | --bin | --bi)
    ac_prev=bindir ;;
  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
    bindir="$ac_optarg" ;;

  -build | --build | --buil | --bui | --bu)
    ac_prev=build ;;
  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
    build="$ac_optarg" ;;

  -cache-file | --cache-file | --cache-fil | --cache-fi \
  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
    ac_prev=cache_file ;;
  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
    cache_file="$ac_optarg" ;;

  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
    ac_prev=datadir ;;
  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
  | --da=*)
    datadir="$ac_optarg" ;;

  -disable-* | --disable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    eval "enable_${ac_feature}=no" ;;

  -enable-* | --enable-*)
    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
    fi
    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "enable_${ac_feature}='$ac_optarg'" ;;

  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
  | --exec | --exe | --ex)
    ac_prev=exec_prefix ;;
  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
  | --exec=* | --exe=* | --ex=*)
    exec_prefix="$ac_optarg" ;;

  -gas | --gas | --ga | --g)
    # Obsolete; use --with-gas.
    with_gas=yes ;;

  -help | --help | --hel | --he)
    # Omit some internal or obsolete options to make the list less imposing.
    # This message is too long to be a string in the A/UX 3.1 sh.
    cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
  --cache-file=FILE       cache test results in FILE
  --help                  print this message
  --no-create             do not create output files
  --quiet, --silent       do not print \`checking...' messages
  --version               print the version of autoconf that created configure
Directory and file names:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [$ac_default_prefix]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [same as prefix]
  --bindir=DIR            user executables in DIR [EPREFIX/bin]
  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
  --datadir=DIR           read-only architecture-independent data in DIR
                          [PREFIX/share]
  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
                          [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
  --includedir=DIR        C header files in DIR [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
  --infodir=DIR           info documentation in DIR [PREFIX/info]
  --mandir=DIR            man documentation in DIR [PREFIX/man]
  --srcdir=DIR            find the sources in DIR [configure dir or ..]
  --program-prefix=PREFIX prepend PREFIX to installed program names
  --program-suffix=SUFFIX append SUFFIX to installed program names
  --program-transform-name=PROGRAM
                          run sed PROGRAM on installed program names
EOF
    cat << EOF
Host type:
  --build=BUILD           configure for building on BUILD [BUILD=HOST]
  --host=HOST             configure for HOST [guessed]
  --target=TARGET         configure for TARGET [TARGET=HOST]
Features and packages:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --x-includes=DIR        X include files are in DIR
  --x-libraries=DIR       X library files are in DIR
EOF
    if test -n "$ac_help"; then
      echo "--enable and --with options recognized:$ac_help"
    fi
    exit 0 ;;

  -host | --host | --hos | --ho)
    ac_prev=host ;;
  -host=* | --host=* | --hos=* | --ho=*)
    host="$ac_optarg" ;;

  -includedir | --includedir | --includedi | --included | --include \
  | --includ | --inclu | --incl | --inc)
    ac_prev=includedir ;;
  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
  | --includ=* | --inclu=* | --incl=* | --inc=*)
    includedir="$ac_optarg" ;;

  -infodir | --infodir | --infodi | --infod | --info | --inf)
    ac_prev=infodir ;;
  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
    infodir="$ac_optarg" ;;

  -libdir | --libdir | --libdi | --libd)
    ac_prev=libdir ;;
  -libdir=* | --libdir=* | --libdi=* | --libd=*)
    libdir="$ac_optarg" ;;

  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
  | --libexe | --libex | --libe)
    ac_prev=libexecdir ;;
  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
  | --libexe=* | --libex=* | --libe=*)
    libexecdir="$ac_optarg" ;;

  -localstatedir | --localstatedir | --localstatedi | --localstated \
  | --localstate | --localstat | --localsta | --localst \
  | --locals | --local | --loca | --loc | --lo)
    ac_prev=localstatedir ;;
  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
    localstatedir="$ac_optarg" ;;

  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
    ac_prev=mandir ;;
  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
    mandir="$ac_optarg" ;;

  -nfp | --nfp | --nf)
    # Obsolete; use --without-fp.
    with_fp=no ;;

  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c)
    no_create=yes ;;

  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
    no_recursion=yes ;;

  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
  | --oldin | --oldi | --old | --ol | --o)
    ac_prev=oldincludedir ;;
  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
    oldincludedir="$ac_optarg" ;;

  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
    ac_prev=prefix ;;
  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
    prefix="$ac_optarg" ;;

  -program-prefix | --program-prefix | --program-prefi | --program-pref \
  | --program-pre | --program-pr | --program-p)
    ac_prev=program_prefix ;;
  -program-prefix=* | --program-prefix=* | --program-prefi=* \
  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
    program_prefix="$ac_optarg" ;;

  -program-suffix | --program-suffix | --program-suffi | --program-suff \
  | --program-suf | --program-su | --program-s)
    ac_prev=program_suffix ;;
  -program-suffix=* | --program-suffix=* | --program-suffi=* \
  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
    program_suffix="$ac_optarg" ;;

  -program-transform-name | --program-transform-name \
  | --program-transform-nam | --program-transform-na \
  | --program-transform-n | --program-transform- \
  | --program-transform | --program-transfor \
  | --program-transfo | --program-transf \
  | --program-trans | --program-tran \
  | --progr-tra | --program-tr | --program-t)
    ac_prev=program_transform_name ;;
  -program-transform-name=* | --program-transform-name=* \
  | --program-transform-nam=* | --program-transform-na=* \
  | --program-transform-n=* | --program-transform-=* \
  | --program-transform=* | --program-transfor=* \
  | --program-transfo=* | --program-transf=* \
  | --program-trans=* | --program-tran=* \
  | --progr-tra=* | --program-tr=* | --program-t=*)
    program_transform_name="$ac_optarg" ;;

  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
  | -silent | --silent | --silen | --sile | --sil)
    silent=yes ;;

  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
    ac_prev=sbindir ;;
  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
  | --sbi=* | --sb=*)
    sbindir="$ac_optarg" ;;

  -sharedstatedir | --sharedstatedir | --sharedstatedi \
  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
  | --sharedst | --shareds | --shared | --share | --shar \
  | --sha | --sh)
    ac_prev=sharedstatedir ;;
  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
  | --sha=* | --sh=*)
    sharedstatedir="$ac_optarg" ;;

  -site | --site | --sit)
    ac_prev=site ;;
  -site=* | --site=* | --sit=*)
    site="$ac_optarg" ;;

  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
    ac_prev=srcdir ;;
  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
    srcdir="$ac_optarg" ;;

  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
  | --syscon | --sysco | --sysc | --sys | --sy)
    ac_prev=sysconfdir ;;
  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
    sysconfdir="$ac_optarg" ;;

  -target | --target | --targe | --targ | --tar | --ta | --t)
    ac_prev=target ;;
  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
    target="$ac_optarg" ;;

  -v | -verbose | --verbose | --verbos | --verbo | --verb)
    verbose=yes ;;

  -version | --version | --versio | --versi | --vers)
    echo "configure generated by autoconf version 2.13"
    exit 0 ;;

  -with-* | --with-*)
    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    case "$ac_option" in
      *=*) ;;
      *) ac_optarg=yes ;;
    esac
    eval "with_${ac_package}='$ac_optarg'" ;;

  -without-* | --without-*)
    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
    # Reject names that are not valid shell variable names.
    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
    fi
    ac_package=`echo $ac_package| sed 's/-/_/g'`
    eval "with_${ac_package}=no" ;;

  --x)
    # Obsolete; use --with-x.
    with_x=yes ;;

  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
  | --x-incl | --x-inc | --x-in | --x-i)
    ac_prev=x_includes ;;
  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
    x_includes="$ac_optarg" ;;

  -x-libraries | --x-libraries | --x-librarie | --x-librari \
  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
    ac_prev=x_libraries ;;
  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
    x_libraries="$ac_optarg" ;;

  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
    ;;

  *)
    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
      echo "configure: warning: $ac_option: invalid host type" 1>&2
    fi
    if test "x$nonopt" != xNONE; then
      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
    fi
    nonopt="$ac_option"
    ;;

  esac
done

if test -n "$ac_prev"; then
  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
  exec 6>/dev/null
else
  exec 6>&1
fi
exec 5>./config.log

echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5

# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
  case "$ac_arg" in
  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
  | --no-cr | --no-c) ;;
  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
  esac
done

# NLS nuisances.
# Only set these to C if already set.  These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h

# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=acinclude.m4

# Find the source files, if location was not specified.
if test -z "$srcdir"; then
  ac_srcdir_defaulted=yes
  # Try the directory containing this script, then its parent.
  ac_prog=$0
  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
  srcdir=$ac_confdir
  if test ! -r $srcdir/$ac_unique_file; then
    srcdir=..
  fi
else
  ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
  if test "$ac_srcdir_defaulted" = yes; then
    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
  else
    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
  fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`

# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    echo "loading site script $ac_site_file"
    . "$ac_site_file"
  fi
done

if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
    ac_n= ac_c='
' ac_t='	'
  else
    ac_n=-n ac_c= ac_t=
  fi
else
  ac_n= ac_c='\c' ac_t=
fi

 
ac_aux_dir=
for ac_dir in admin $srcdir/admin; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  { echo "configure: error: can not find install-sh or install.sh in admin $srcdir/admin" 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.



# Do some error checking and defaulting for the host and target type.
# The inputs are:
#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
#    same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
#    as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.

# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac


# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi

echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:619: checking host system type" >&5

host_alias=$host
case "$host_alias" in
NONE)
  case $nonopt in
  NONE)
    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
    fi ;;
  *) host_alias=$nonopt ;;
  esac ;;
esac

host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6

echo $ac_n "checking target system type""... $ac_c" 1>&6
echo "configure:640: checking target system type" >&5

target_alias=$target
case "$target_alias" in
NONE)
  case $nonopt in
  NONE) target_alias=$host_alias ;;
  *) target_alias=$nonopt ;;
  esac ;;
esac

target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6

echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:658: checking build system type" >&5

build_alias=$build
case "$build_alias" in
NONE)
  case $nonopt in
  NONE) build_alias=$host_alias ;;
  *) build_alias=$nonopt ;;
  esac ;;
esac

build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6

test "$host_alias" != "$target_alias" &&
  test "$program_prefix$program_suffix$program_transform_name" = \
    NONENONEs,x,x, &&
  program_prefix=${target_alias}-
 


    
          test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
  test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
  test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
  # Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:698: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
  for ac_dir in $PATH; do
    # Account for people who put trailing slashes in PATH elements.
    case "$ac_dir/" in
    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
    *)
      # OSF1 and SCO ODT 3.0 have their own names for install.
      # Don't use installbsd from OSF since it installs stuff as root
      # by default.
      for ac_prog in ginstall scoinst install; do
        if test -f $ac_dir/$ac_prog; then
	  if test $ac_prog = install &&
            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  else
	    ac_cv_path_install="$ac_dir/$ac_prog -c"
	    break 2
	  fi
	fi
      done
      ;;
    esac
  done
  IFS="$ac_save_IFS"

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL="$ac_cv_path_install"
  else
    # As a last resort, use the slow shell script.  We don't cache a
    # path for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the path is relative.
    INSTALL="$ac_install_sh"
  fi
fi
echo "$ac_t""$INSTALL" 1>&6

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'


  if test -z "$kde_save_INSTALL_given" ; then
    # OK, user hasn't given any INSTALL, autoconf found one for us
    # now we test, if it supports the -p flag
    echo $ac_n "checking for -p flag to install""... $ac_c" 1>&6
echo "configure:755: checking for -p flag to install" >&5
    rm -f confinst.$$.* > /dev/null 2>&1
    echo "Testtest" > confinst.$$.orig
    ac_res=no
    if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
      if test -f confinst.$$.new ; then
        # OK, -p seems to do no harm to install
	INSTALL="${INSTALL} -p"
	ac_res=yes
      fi
    fi
    rm -f confinst.$$.*
    echo "$ac_t""$ac_res" 1>&6
  fi
                                                      
  if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
    INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
  fi
  if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
    INSTALL_SCRIPT='${INSTALL}'
  fi

echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:778: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
   if test "$*" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftestfile`
   fi
   if test "$*" != "X $srcdir/configure conftestfile" \
      && test "$*" != "X conftestfile $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
alias in your environment" 1>&2; exit 1; }
   fi

   test "$2" = conftestfile
   )
then
   # Ok.
   :
else
   { echo "configure: error: newly created file is older than distributed files!
Check your system clock" 1>&2; exit 1; }
fi
rm -f conftest*
echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
  program_transform_name=
else
  # Double any \ or $.  echo might interpret backslashes.
  cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
  rm -f conftestsed
fi
test "$program_prefix" != NONE &&
  program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"

# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"

echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:835: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftestmake <<\EOF
all:
	@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
  eval ac_cv_prog_make_${ac_make}_set=yes
else
  eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  SET_MAKE=
else
  echo "$ac_t""no" 1>&6
  SET_MAKE="MAKE=${MAKE-make}"
fi


PACKAGE=qterm

VERSION=0.1.4

if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
fi
cat >> confdefs.h <<EOF
#define PACKAGE "$PACKAGE"
EOF

cat >> confdefs.h <<EOF
#define VERSION "$VERSION"
EOF



missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:881: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
   ACLOCAL=aclocal
   echo "$ac_t""found" 1>&6
else
   ACLOCAL="$missing_dir/missing aclocal"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:894: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
   AUTOCONF=autoconf
   echo "$ac_t""found" 1>&6
else
   AUTOCONF="$missing_dir/missing autoconf"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:907: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
   AUTOMAKE=automake
   echo "$ac_t""found" 1>&6
else
   AUTOMAKE="$missing_dir/missing automake"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:920: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
   AUTOHEADER=autoheader
   echo "$ac_t""found" 1>&6
else
   AUTOHEADER="$missing_dir/missing autoheader"
   echo "$ac_t""missing" 1>&6
fi

echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:933: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf.  Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
   MAKEINFO=makeinfo
   echo "$ac_t""found" 1>&6
else
   MAKEINFO="$missing_dir/missing makeinfo"
   echo "$ac_t""missing" 1>&6
fi





if test "x$prefix" = "xNONE"; then
  prefix=$ac_default_prefix
  ac_configure_args="$ac_configure_args --prefix $prefix"
fi



 

  # Check whether --enable-debug or --disable-debug was given.
if test "${enable_debug+set}" = set; then
  enableval="$enable_debug"
  
   if test $enableval = "no";      then
       kde_use_debug_code="no"
       kde_use_debug_define=yes
     else
       kde_use_debug_code="yes"
       kde_use_debug_define=no
   fi
  
else
  kde_use_debug_code="no"
      kde_use_debug_define=no
  
fi


    # Check whether --enable-dummyoption or --disable-dummyoption was given.
if test "${enable_dummyoption+set}" = set; then
  enableval="$enable_dummyoption"
  :
fi


  # Check whether --enable-strict or --disable-strict was given.
if test "${enable_strict+set}" = set; then
  enableval="$enable_strict"
  
    if test $enableval = "no"; then
         kde_use_strict_options="no"
       else
         kde_use_strict_options="yes"
    fi
   
else
  kde_use_strict_options="no"
fi


  # Check whether --enable-profile or --disable-profile was given.
if test "${enable_profile+set}" = set; then
  enableval="$enable_profile"
  kde_use_profiling=$enableval
else
  kde_use_profiling="no"
  
fi


    CFLAGS=" $CFLAGS"

  # Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1014: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="gcc"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$CC"; then
  # Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1044: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_prog_rejected=no
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
	continue
      fi
      ac_cv_prog_CC="cc"
      break
    fi
  done
  IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
  # We found a bogon in the path, so make sure we never use it.
  set dummy $ac_cv_prog_CC
  shift
  if test $# -gt 0; then
    # We chose a different compiler from the bogus one.
    # However, it has the same basename, so the bogon will be chosen
    # first if we set CC to just the basename; use the full file name.
    shift
    set dummy "$ac_dir/$ac_word" "$@"
    shift
    ac_cv_prog_CC="$@"
  fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  if test -z "$CC"; then
    case "`uname -s`" in
    *win32* | *WIN32*)
      # Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1095: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CC"; then
  ac_cv_prog_CC="$CC" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CC="cl"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
  echo "$ac_t""$CC" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
 ;;
    esac
  fi
  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi

echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1127: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext << EOF

#line 1138 "configure"
#include "confdefs.h"

main(){return(0);}
EOF
if { (eval echo configure:1143: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cc_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cc_cross=no
  else
    ac_cv_prog_cc_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1169: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1174: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.c <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1183: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gcc=yes
else
  ac_cv_prog_gcc=no
fi
fi

echo "$ac_t""$ac_cv_prog_gcc" 1>&6

if test $ac_cv_prog_gcc = yes; then
  GCC=yes
else
  GCC=
fi

ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1202: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
  ac_cv_prog_cc_g=yes
else
  ac_cv_prog_cc_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
  CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
  if test "$GCC" = yes; then
    CFLAGS="-g -O2"
  else
    CFLAGS="-g"
  fi
else
  if test "$GCC" = yes; then
    CFLAGS="-O2"
  else
    CFLAGS=
  fi
fi
 

  if test "$GCC" = "yes"; then
    if test "$kde_use_debug_code" = "yes"; then
      CFLAGS="-g -O2 $CFLAGS"
      case $host in
        *-*-linux-gnu)	
          CFLAGS="-ansi -W -Wall -pedantic -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS"
        ;;
      esac
    else
      CFLAGS="-O2 $CFLAGS"
    fi
  fi

  if test "$kde_use_debug_define" = "yes"; then
    CFLAGS="-DNDEBUG $CFLAGS"
  fi

  case "$host" in
  *-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";;
  *-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";;
  esac

  if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
     LDFLAGS=""
  fi

  CXXFLAGS=" $CXXFLAGS"

  for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1267: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$CXX"; then
  ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_CXX="$ac_prog"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
CXX="$ac_cv_prog_CXX"
if test -n "$CXX"; then
  echo "$ac_t""$CXX" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

test -n "$CXX" && break
done
test -n "$CXX" || CXX="gcc"


echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
echo "configure:1299: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5


ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross

ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'



cat > conftest.$ac_ext << EOF

#line 1315 "configure"
#include "confdefs.h"

int main(){return(0);}
EOF
if { (eval echo configure:1320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  ac_cv_prog_cxx_works=yes
  # If we can't run a trivial program, we are probably using a cross compiler.
  if (./conftest; exit) 2>/dev/null; then
    ac_cv_prog_cxx_cross=no
  else
    ac_cv_prog_cxx_cross=yes
  fi
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_cv_prog_cxx_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
if test $ac_cv_prog_cxx_works = no; then
  { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
echo "configure:1346: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross

echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
echo "configure:1351: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.C <<EOF
#ifdef __GNUC__
  yes;
#endif
EOF
if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1360: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
  ac_cv_prog_gxx=yes
else
  ac_cv_prog_gxx=no
fi
fi

echo "$ac_t""$ac_cv_prog_gxx" 1>&6

if test $ac_cv_prog_gxx = yes; then
  GXX=yes
else
  GXX=
fi

ac_test_CXXFLAGS="${CXXFLAGS+set}"
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
echo "configure:1379: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  echo 'void f(){}' > conftest.cc
if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
  ac_cv_prog_cxx_g=yes
else
  ac_cv_prog_cxx_g=no
fi
rm -f conftest*

fi

echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
if test "$ac_test_CXXFLAGS" = set; then
  CXXFLAGS="$ac_save_CXXFLAGS"
elif test $ac_cv_prog_cxx_g = yes; then
  if test "$GXX" = yes; then
    CXXFLAGS="-g -O2"
  else
    CXXFLAGS="-g"
  fi
else
  if test "$GXX" = yes; then
    CXXFLAGS="-O2"
  else
    CXXFLAGS=
  fi
fi


  if test "$GXX" = "yes"; then
    if test "$kde_use_debug_code" = "yes"; then
      CXXFLAGS="-g -O2 -Wall -pedantic -W -Wpointer-arith -Wmissing-prototypes -Wwrite-strings $CXXFLAGS"

      
echo $ac_n "checking whether $CXX supports -Wno-long-long""... $ac_c" 1>&6
echo "configure:1417: checking whether $CXX supports -Wno-long-long" >&5
kde_cache=`echo Wno-long-long | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -Wno-long-long -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -Wno-long-long -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 CXXFLAGS="-Wno-long-long $CXXFLAGS"
else
 echo "$ac_t""no" 1>&6
 :
 
fi

      
echo $ac_n "checking whether $CXX supports -Wnon-virtual-dtor""... $ac_c" 1>&6
echo "configure:1446: checking whether $CXX supports -Wnon-virtual-dtor" >&5
kde_cache=`echo Wnon-virtual-dtor | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -Wnon-virtual-dtor -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -Wnon-virtual-dtor -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 CXXFLAGS="-Wnon-virtual-dtor $CXXFLAGS"
else
 echo "$ac_t""no" 1>&6
 :
 
fi

      
echo $ac_n "checking whether $CXX supports -fno-builtin""... $ac_c" 1>&6
echo "configure:1475: checking whether $CXX supports -fno-builtin" >&5
kde_cache=`echo fno-builtin | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -fno-builtin -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -fno-builtin -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 CXXFLAGS="-fno-builtin $CXXFLAGS"
else
 echo "$ac_t""no" 1>&6
 :
 
fi


      case $host in        *-*-linux-gnu)
        CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wbad-function-cast -Wcast-align -Wundef -Wconversion $CXXFLAGS"
        ;;
      esac

      if test "$kde_use_strict_options" = "yes"; then
        CXXFLAGS="-Wcast-qual -Wbad-function-cast -Wshadow -Wcast-align $CXXFLAGS"
      fi

      if test "$kde_very_strict" = "yes"; then
        CXXFLAGS="-Wold-style-cast -Wredundant-decls -Wconversion $CXXFLAGS"
      fi
    else
      CXXFLAGS="-O2 $CXXFLAGS"
    fi
  fi

  if test "$kde_use_debug_define" = "yes"; then
    CXXFLAGS="-DNDEBUG $CXXFLAGS"
  fi  

  if test "$kde_use_profiling" = "yes"; then
    
echo $ac_n "checking whether $CXX supports -pg""... $ac_c" 1>&6
echo "configure:1527: checking whether $CXX supports -pg" >&5
kde_cache=`echo pg | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -pg -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -pg -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 
      CFLAGS="-pg $CFLAGS"
      CXXFLAGS="-pg $CXXFLAGS"
    
else
 echo "$ac_t""no" 1>&6
 :
 
fi

  fi
    
  
echo $ac_n "checking whether $CXX supports -fno-exceptions""... $ac_c" 1>&6
echo "configure:1561: checking whether $CXX supports -fno-exceptions" >&5
kde_cache=`echo fno-exceptions | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -fno-exceptions -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -fno-exceptions -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 CXXFLAGS="$CXXFLAGS -fno-exceptions"
else
 echo "$ac_t""no" 1>&6
 :
 
fi

  
echo $ac_n "checking whether $CXX supports -fno-check-new""... $ac_c" 1>&6
echo "configure:1590: checking whether $CXX supports -fno-check-new" >&5
kde_cache=`echo fno-check-new | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -fno-check-new -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -fno-check-new -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 CXXFLAGS="$CXXFLAGS -fno-check-new"
else
 echo "$ac_t""no" 1>&6
 :
 
fi

  
echo $ac_n "checking whether $CXX supports -fexceptions""... $ac_c" 1>&6
echo "configure:1619: checking whether $CXX supports -fexceptions" >&5
kde_cache=`echo fexceptions | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -fexceptions -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -fexceptions -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 USE_EXCEPTIONS="-fexceptions"
else
 echo "$ac_t""no" 1>&6
 :
 USE_EXCEPTIONS=	
fi

  
    USE_RTTI=
  

  case "$host" in
      *-*-irix*)  test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;;
      *-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";;
      *-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";;
      *-*-solaris*) 
        if test "$GXX" = yes; then
          libstdcpp=`$CXX -print-file-name=libstdc++.so`
          if test ! -f $libstdcpp; then
             { echo "configure: error: You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so" 1>&2; exit 1; }
          fi
        fi
        ;;
  esac

    __val=$CXX
  __forbid=" -fno-rtti -rpath "
  if test -n "$__val"; then
    __new=""
    ac_save_IFS=$IFS
    IFS=" 	"
    for i in $__val; do
      case "$__forbid" in
        *" $i "*) echo "configure: warning: found forbidden $i in CXX, removing it" 1>&2 ;;
	*) # Careful to not add spaces, where there were none, because otherwise
	   # libtool gets confused, if we change e.g. CXX
	   if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
      esac
    done
    IFS=$ac_save_IFS
    CXX=$__new
  fi

  __val=$CXXFLAGS
  __forbid=" -fno-rtti -rpath "
  if test -n "$__val"; then
    __new=""
    ac_save_IFS=$IFS
    IFS=" 	"
    for i in $__val; do
      case "$__forbid" in
        *" $i "*) echo "configure: warning: found forbidden $i in CXXFLAGS, removing it" 1>&2 ;;
	*) # Careful to not add spaces, where there were none, because otherwise
	   # libtool gets confused, if we change e.g. CXX
	   if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
      esac
    done
    IFS=$ac_save_IFS
    CXXFLAGS=$__new
  fi



  echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
echo "configure:1703: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
   ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross

ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'

  CXXCPP="${CXX-g++} -E"
  cat > conftest.$ac_ext <<EOF
#line 1719 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1724: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CXXCPP=/lib/cpp
fi
rm -f conftest*
  ac_cv_prog_CXXCPP="$CXXCPP"
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
fi
fi
CXXCPP="$ac_cv_prog_CXXCPP"
echo "$ac_t""$CXXCPP" 1>&6


  # the following is to allow programs, that are known to
  # have problems when compiled with -O2
  if test -n "$CXXFLAGS"; then
      kde_safe_IFS=$IFS
      IFS=" "
      NOOPT_CXXFLAGS=""
      for i in $CXXFLAGS; do
        case $i in
          -O*)
                ;;
          *)
                NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS $i"
                ;;
        esac
      done
      IFS=$kde_safe_IFS
  fi

  if test "x$kde_use_qt_emb" = "xyes"; then
    NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS -DQWS"
  fi

  

  
  # Check whether --enable-final or --disable-final was given.
if test "${enable_final+set}" = set; then
  enableval="$enable_final"
  kde_use_final=$enableval
else
  kde_use_final=no
fi


  
  REPO=""
  NOREPO=""

  
echo $ac_n "checking whether $CXX supports -frepo""... $ac_c" 1>&6
echo "configure:1789: checking whether $CXX supports -frepo" >&5
kde_cache=`echo frepo | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -frepo -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -frepo -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 
     REPO="-frepo"
     NOREPO="-fno-repo"
   
else
 echo "$ac_t""no" 1>&6
 :
 
fi


  if test -z "$REPO"; then
  
echo $ac_n "checking whether $CXX supports -instances=explicit""... $ac_c" 1>&6
echo "configure:1823: checking whether $CXX supports -instances=explicit" >&5
kde_cache=`echo instances=explicit | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -instances=explicit -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -instances=explicit -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 
     REPO="-instances=explicit"
     NOREPO="-instances=extern"
  
else
 echo "$ac_t""no" 1>&6
 :
 
fi

  fi

  if test -n "$REPO"; then
     cat >> confdefs.h <<EOF
#define HAVE_TEMPLATE_REPOSITORY 1
EOF

     
  fi

  
  

  if test "x$kde_use_final" = "xyes"; then
      KDE_USE_FINAL_TRUE=""
      KDE_USE_FINAL_FALSE="#"
   else
      KDE_USE_FINAL_TRUE="#"
      KDE_USE_FINAL_FALSE=""
  fi
  
  

  # Check whether --enable-closure or --disable-closure was given.
if test "${enable_closure+set}" = set; then
  enableval="$enable_closure"
  kde_use_closure=$enableval
else
  kde_use_closure=yes
fi


  if test "x$kde_use_closure" = "xyes"; then
       KDE_USE_CLOSURE_TRUE=""
       KDE_USE_CLOSURE_FALSE="#"
#       CXXFLAGS="$CXXFLAGS $REPO"
  else
       KDE_USE_CLOSURE_TRUE="#"
       KDE_USE_CLOSURE_FALSE=""
  fi
  
  


  

  KDE_CXXFLAGS=
  

# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
  enableval="$enable_shared"
  p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_shared=yes
fi

# Check whether --enable-static or --disable-static was given.
if test "${enable_static+set}" = set; then
  enableval="$enable_static"
  p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_static=no
fi

# Check whether --enable-fast-install or --disable-fast-install was given.
if test "${enable_fast_install+set}" = set; then
  enableval="$enable_fast_install"
  p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac
else
  enable_fast_install=yes
fi

# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
  withval="$with_gnu_ld"
  test "$withval" = no || with_gnu_ld=yes
else
  with_gnu_ld=no
fi

ac_prog=ld
if test "$GCC" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
echo "configure:1983: checking for ld used by GCC" >&5
  case $host in
  *-*-mingw*)
    # gcc leaves a trailing carriage return which upsets mingw
    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
  *)
    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
  esac
  case $ac_prog in
    # Accept absolute paths.
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
echo "configure:2013: checking for GNU ld" >&5
else
  echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
echo "configure:2016: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      lt_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi

LD="$lt_cv_path_LD"
if test -n "$LD"; then
  echo "$ac_t""$LD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
echo "configure:2051: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  lt_cv_prog_gnu_ld=yes
else
  lt_cv_prog_gnu_ld=no
fi
fi

echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
with_gnu_ld=$lt_cv_prog_gnu_ld


echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
echo "configure:2068: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  lt_cv_ld_reload_flag='-r'
fi

echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"

echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
echo "configure:2080: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$NM"; then
  # Let the user override the test.
  lt_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    tmp_nm=$ac_dir/${ac_tool_prefix}nm
    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      # Tru64's nm complains that /dev/null is an invalid object file
      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
	lt_cv_path_NM="$tmp_nm -B"
	break
      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	lt_cv_path_NM="$tmp_nm -p"
	break
      else
	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi

NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6

echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
echo "configure:2118: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftestdata
if ln -s X conftestdata 2>/dev/null
then
  rm -f conftestdata
  ac_cv_prog_LN_S="ln -s"
else
  ac_cv_prog_LN_S=ln
fi
fi
LN_S="$ac_cv_prog_LN_S"
if test "$ac_cv_prog_LN_S" = "ln -s"; then
  echo "$ac_t""yes" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
echo "configure:2139: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [regex]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given egrep regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.

case $host_os in
aix*)
  lt_cv_deplibs_check_method=pass_all
  ;;

beos*)
  lt_cv_deplibs_check_method=pass_all
  ;;

bsdi4*)
  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  lt_cv_file_magic_test_file=/shlib/libc.so
  ;;

cygwin* | mingw* |pw32*)
  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
  lt_cv_file_magic_cmd='$OBJDUMP -f'
  ;;

darwin* | rhapsody*)
  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  case "$host_os" in
  rhapsody* | darwin1.012)
    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
    ;;
  *) # Darwin 1.3 on
    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
    ;;
  esac
  ;;

freebsd* )
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    case $host_cpu in
    i*86 )
      # Not sure whether the presence of OpenBSD here was a mistake.
      # Let's accept both of them until this is cleared up.
      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
      lt_cv_file_magic_cmd=/usr/bin/file
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;

gnu*)
  lt_cv_deplibs_check_method=pass_all
  ;;

hpux10.20*|hpux11*)
  lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libc.sl
  ;;

irix5* | irix6*)
  case $host_os in
  irix5*)
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
    ;;
  *)
    case $LD in
    *-32|*"-32 ") libmagic=32-bit;;
    *-n32|*"-n32 ") libmagic=N32;;
    *-64|*"-64 ") libmagic=64-bit;;
    *) libmagic=never-match;;
    esac
    # this will be overridden with pass_all, but let us keep it just in case
    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
    ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
  lt_cv_deplibs_check_method=pass_all
  ;;

# This must be Linux ELF.
linux-gnu*)
  case $host_cpu in
  alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | mips* | hppa* | sh* )
    lt_cv_deplibs_check_method=pass_all ;;
  *)
    # glibc up to 2.1.1 does not perform some relocations on ARM
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
  esac
  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
  ;;

netbsd*)
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library'
  else
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
  fi
  lt_cv_file_magic_cmd='/usr/bin/file -L'
  lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
  ;;

openbsd* )
  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
    case "$host_cpu" in
    i*86 )
            lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library'
            lt_cv_file_magic_cmd=/usr/bin/file
      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
      ;;
    esac
  else
    lt_cv_deplibs_check_method=pass_all
  fi
  ;;

newsos6)
  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
  lt_cv_file_magic_cmd=/usr/bin/file
  lt_cv_file_magic_test_file=/usr/lib/libnls.so
  ;;

osf3* | osf4* | osf5*)
  # this will be overridden with pass_all, but let us keep it just in case
  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
  lt_cv_file_magic_test_file=/shlib/libc.so
  lt_cv_deplibs_check_method=pass_all
  ;;

sco3.2v5*)
  lt_cv_deplibs_check_method=pass_all
  ;;

solaris*)
  lt_cv_deplibs_check_method=pass_all
  lt_cv_file_magic_test_file=/lib/libc.so
  ;;

sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
  case $host_vendor in
  ncr)
    lt_cv_deplibs_check_method=pass_all
    ;;
  motorola)
    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
    ;;
  esac
  ;;
esac

fi

echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method

if test $host != $build; then
  ac_tool_prefix=${host_alias}-
else
  ac_tool_prefix=
fi

# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!

# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
echo "configure:2327: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case $MAGIC_CMD in
  /*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
  ?:/*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
  ;;
  *)
  ac_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="/usr/bin:$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/${ac_tool_prefix}file; then
      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$ac_save_ifs"
  MAGIC_CMD="$ac_save_MAGIC_CMD"
  ;;
esac
fi

MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  echo "$ac_t""$MAGIC_CMD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

if test -z "$lt_cv_path_MAGIC_CMD"; then
  if test -n "$ac_tool_prefix"; then
    echo $ac_n "checking for file""... $ac_c" 1>&6
echo "configure:2389: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case $MAGIC_CMD in
  /*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
  ;;
  ?:/*)
  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
  ;;
  *)
  ac_save_MAGIC_CMD="$MAGIC_CMD"
  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="/usr/bin:$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/file; then
      lt_cv_path_MAGIC_CMD="$ac_dir/file"
      if test -n "$file_magic_test_file"; then
	case $deplibs_check_method in
	"file_magic "*)
	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
	    egrep "$file_magic_regex" > /dev/null; then
	    :
	  else
	    cat <<EOF 1>&2

*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such.  This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem.  Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org

EOF
	  fi ;;
	esac
      fi
      break
    fi
  done
  IFS="$ac_save_ifs"
  MAGIC_CMD="$ac_save_MAGIC_CMD"
  ;;
esac
fi

MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
  echo "$ac_t""$MAGIC_CMD" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

  else
    MAGIC_CMD=:
  fi
fi

  fi
  ;;
esac

# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2460: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


if test -z "$ac_cv_prog_RANLIB"; then
if test -n "$ac_tool_prefix"; then
  # Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2492: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$RANLIB"; then
  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_RANLIB="ranlib"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
  echo "$ac_t""$RANLIB" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

else
  RANLIB=":"
fi
fi

# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2527: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
      break
    fi
  done
  IFS="$ac_save_ifs"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
  echo "$ac_t""$STRIP" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


if test -z "$ac_cv_prog_STRIP"; then
if test -n "$ac_tool_prefix"; then
  # Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2559: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_prog_STRIP="strip"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
fi
fi
STRIP="$ac_cv_prog_STRIP"
if test -n "$STRIP"; then
  echo "$ac_t""$STRIP" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

else
  STRIP=":"
fi
fi


# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
libtool_flags="$libtool_flags --enable-dlopen"

# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
  enableval="$enable_libtool_lock"
  :
fi

test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"

# Check whether --with-pic or --without-pic was given.
if test "${with_pic+set}" = set; then
  withval="$with_pic"
  pic_mode="$withval"
else
  pic_mode=default
fi

test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '#line 2626 "configure"' > conftest.$ac_ext
  if { (eval echo configure:2627: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    case `/usr/bin/file conftest.$ac_objext` in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
echo "configure:2648: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
     ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

     cat > conftest.$ac_ext <<EOF
#line 2661 "configure"
#include "confdefs.h"

int main() {

; return 0; }
EOF
if { (eval echo configure:2668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  lt_cv_cc_needs_belf=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  lt_cv_cc_needs_belf=no
fi
rm -f conftest*
     ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

fi

echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;


esac


echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
echo "configure:2699: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2704 "configure"
#include "confdefs.h"

int main() {

#ifndef __CYGWIN__
#define __CYGWIN__ __CYGWIN32__
#endif
return __CYGWIN__;
; return 0; }
EOF
if { (eval echo configure:2715: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_cygwin=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_cygwin=no
fi
rm -f conftest*
rm -f conftest*
fi

echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
echo "configure:2732: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 2737 "configure"
#include "confdefs.h"

int main() {
return __MINGW32__;
; return 0; }
EOF
if { (eval echo configure:2744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_mingw32=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_mingw32=no
fi
rm -f conftest*
rm -f conftest*
fi

echo "$ac_t""$ac_cv_mingw32" 1>&6
MINGW32=
test "$ac_cv_mingw32" = yes && MINGW32=yes

# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache


# Actually configure libtool.  ac_aux_dir is where install-sh is found.
AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }

# Reload cache, that may have been modified by ltconfig
if test -r "$cache_file"; then
  echo "loading cache $cache_file"
  . $cache_file
else
  echo "creating cache $cache_file"
  > $cache_file
fi


# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log



LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
lt_save_CC="$CC"
lt_save_CFLAGS="$CFLAGS"
AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
deplibs_check_method="$deplibs_check_method" \
file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
|| { echo "configure: error: libtool tag configuration failed" 1>&2; exit 1; }
CC="$lt_save_CC"
CFLAGS="$lt_save_CFLAGS"

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log









ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

echo $ac_n "checking for object suffix""... $ac_c" 1>&6
echo "configure:2879: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
if { (eval echo configure:2885: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  for ac_file in conftest.*; do
    case $ac_file in
    *.c) ;;
    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
    esac
  done
else
  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
fi
rm -f conftest*
fi

echo "$ac_t""$ac_cv_objext" 1>&6
OBJEXT=$ac_cv_objext
ac_objext=$ac_cv_objext



echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
echo "configure:2905: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
  ac_cv_exeext=.exe
else
  rm -f conftest*
  echo 'int main () { return 0; }' > conftest.$ac_ext
  ac_cv_exeext=
  if { (eval echo configure:2915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
    for file in conftest.*; do
      case $file in
      *.c | *.o | *.obj) ;;
      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
      esac
    done
  else
    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
  fi
  rm -f conftest*
  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
fi
fi

EXEEXT=""
test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
echo "$ac_t""${ac_cv_exeext}" 1>&6
ac_exeext=$EXEEXT

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross


  

  
	 
	 


LIBTOOL_SHELL="/bin/sh ./libtool"
#  LIBTOOL="$LIBTOOL --silent"
KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)"



all_libraries="$all_libraries $USER_LDFLAGS"
all_includes="$all_includes $USER_INCLUDES"




    
    # Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:2966: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$MSGFMT" in
  /*)
  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"; then
	ac_cv_path_MSGFMT="$ac_dir/$ac_word"
	break
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
  ;;
esac
fi
MSGFMT="$ac_cv_path_MSGFMT"
if test -n "$MSGFMT"; then
  echo "$ac_t""$MSGFMT" 1>&6
else
  echo "$ac_t""no" 1>&6
fi

    # Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3000: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$GMSGFMT" in
  /*)
  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
  ;;
  ?:/*)			 
  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
  ac_dummy="$PATH"
  for ac_dir in $ac_dummy; do 
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
      break
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
  ;;
esac
fi
GMSGFMT="$ac_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
  echo "$ac_t""$GMSGFMT" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


     if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
        echo "$ac_t""found msgfmt program is not GNU msgfmt; ignore it" 1>&6
        GMSGFMT=":"
      fi
      MSGFMT=$GMSGFMT
      
      

      # Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:3045: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  case "$XGETTEXT" in
  /*)
  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
	ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
	break
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
  ;;
esac
fi
XGETTEXT="$ac_cv_path_XGETTEXT"
if test -n "$XGETTEXT"; then
  echo "$ac_t""$XGETTEXT" 1>&6
else
  echo "$ac_t""no" 1>&6
fi


            if test "$XGETTEXT" != ":"; then
			if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
	  : ;
	else
	  echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6
	  XGETTEXT=":"
	fi
      fi
     

  

echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:3090: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
  CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
    # This must be in double quotes, not single quotes, because CPP may get
  # substituted into the Makefile and "${CC-cc}" will confuse make.
  CPP="${CC-cc} -E"
  # On the NeXT, cc -E runs the code through the compiler's parser,
  # not just through cpp.
  cat > conftest.$ac_ext <<EOF
#line 3105 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3111: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -E -traditional-cpp"
  cat > conftest.$ac_ext <<EOF
#line 3122 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3128: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP="${CC-cc} -nologo -E"
  cat > conftest.$ac_ext <<EOF
#line 3139 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:3145: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  :
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
  ac_cv_prog_CPP="$CPP"
fi
  CPP="$ac_cv_prog_CPP"
else
  ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6


   ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

      echo $ac_n "checking for main in -lutil""... $ac_c" 1>&6
echo "configure:3178: checking for main in -lutil" >&5
ac_lib_var=`echo util'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lutil  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3186 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
EOF
if { (eval echo configure:3193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBUTIL="-lutil"
else
  echo "$ac_t""no" 1>&6
fi
    
   echo $ac_n "checking for main in -lcompat""... $ac_c" 1>&6
echo "configure:3214: checking for main in -lcompat" >&5
ac_lib_var=`echo compat'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcompat  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3222 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
EOF
if { (eval echo configure:3229: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBCOMPAT="-lcompat"
else
  echo "$ac_t""no" 1>&6
fi
    
   kde_have_crypt=
   echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
echo "configure:3251: checking for crypt in -lcrypt" >&5
ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lcrypt  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3259 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char crypt();

int main() {
crypt()
; return 0; }
EOF
if { (eval echo configure:3270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBCRYPT="-lcrypt"; kde_have_crypt=yes
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for crypt in -lc""... $ac_c" 1>&6
echo "configure:3289: checking for crypt in -lc" >&5
ac_lib_var=`echo c'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lc  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3297 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char crypt();

int main() {
crypt()
; return 0; }
EOF
if { (eval echo configure:3308: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  kde_have_crypt=yes
else
  echo "$ac_t""no" 1>&6

        echo "configure: warning: you have no crypt in either libcrypt or libc.
You should install libcrypt from another source or configure with PAM
support" 1>&2
	kde_have_crypt=no
      
fi

fi

   
   if test $kde_have_crypt = yes; then
      cat >> confdefs.h <<EOF
#define HAVE_CRYPT 1
EOF

   fi
   
  echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
echo "configure:3345: checking for socklen_t" >&5
  if eval "test \"`echo '$''{'ac_cv_socklen_t'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
    
     ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross

ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'


    cat > conftest.$ac_ext <<EOF
#line 3362 "configure"
#include "confdefs.h"

#include <sys/types.h>
#include <sys/socket.h>
      
int main() {

socklen_t a=0;
getsockname(0,(struct sockaddr*)0, &a);
      
; return 0; }
EOF
if { (eval echo configure:3375: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_socklen_t=socklen_t
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  cat > conftest.$ac_ext <<EOF
#line 3383 "configure"
#include "confdefs.h"

#include <sys/types.h>
#include <sys/socket.h>
        
int main() {

int a=0;
getsockname(0,(struct sockaddr*)0, &a);
        
; return 0; }
EOF
if { (eval echo configure:3396: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
  rm -rf conftest*
  ac_cv_socklen_t=int
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_socklen_t=size_t
      
fi
rm -f conftest*
    
fi
rm -f conftest*
    ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

  
fi


  echo "$ac_t""$ac_cv_socklen_t" 1>&6
  if test "$ac_cv_socklen_t" != "socklen_t"; then
    cat >> confdefs.h <<EOF
#define socklen_t $ac_cv_socklen_t
EOF

  fi
  cat >> confdefs.h <<EOF
#define ksize_t socklen_t
EOF



   ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

   echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
echo "configure:3442: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldnet  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3450 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dnet_ntoa();

int main() {
dnet_ntoa()
; return 0; }
EOF
if { (eval echo configure:3461: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
else
  echo "$ac_t""no" 1>&6
fi

   if test $ac_cv_lib_dnet_dnet_ntoa = no; then
      echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
echo "configure:3483: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3491 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dnet_ntoa();

int main() {
dnet_ntoa()
; return 0; }
EOF
if { (eval echo configure:3502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
else
  echo "$ac_t""no" 1>&6
fi

   fi
   echo $ac_n "checking for inet_ntoa""... $ac_c" 1>&6
echo "configure:3524: checking for inet_ntoa" >&5
if eval "test \"`echo '$''{'ac_cv_func_inet_ntoa'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3529 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char inet_ntoa(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char inet_ntoa();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_inet_ntoa) || defined (__stub___inet_ntoa)
choke me
#else
inet_ntoa();
#endif

; return 0; }
EOF
if { (eval echo configure:3552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_inet_ntoa=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_inet_ntoa=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'inet_ntoa`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

   if test $ac_cv_func_inet_ntoa = no; then
     echo $ac_n "checking for inet_ntoa in -lnsl""... $ac_c" 1>&6
echo "configure:3573: checking for inet_ntoa in -lnsl" >&5
ac_lib_var=`echo nsl'_'inet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lnsl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3581 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char inet_ntoa();

int main() {
inet_ntoa()
; return 0; }
EOF
if { (eval echo configure:3592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
else
  echo "$ac_t""no" 1>&6
fi

   fi
   echo $ac_n "checking for connect""... $ac_c" 1>&6
echo "configure:3614: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3619 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char connect(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_connect) || defined (__stub___connect)
choke me
#else
connect();
#endif

; return 0; }
EOF
if { (eval echo configure:3642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_connect=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_connect=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

   if test $ac_cv_func_connect = no; then
      echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
echo "configure:3663: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3671 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char connect();

int main() {
connect()
; return 0; }
EOF
if { (eval echo configure:3682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
else
  echo "$ac_t""no" 1>&6
fi

   fi

   echo $ac_n "checking for remove""... $ac_c" 1>&6
echo "configure:3705: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3710 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char remove(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char remove();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_remove) || defined (__stub___remove)
choke me
#else
remove();
#endif

; return 0; }
EOF
if { (eval echo configure:3733: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_remove=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_remove=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
fi

   if test $ac_cv_func_remove = no; then
      echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
echo "configure:3754: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lposix  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3762 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char remove();

int main() {
remove()
; return 0; }
EOF
if { (eval echo configure:3773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
else
  echo "$ac_t""no" 1>&6
fi

   fi

   # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
   echo $ac_n "checking for shmat""... $ac_c" 1>&6
echo "configure:3797: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3802 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char shmat(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shmat();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_shmat) || defined (__stub___shmat)
choke me
#else
shmat();
#endif

; return 0; }
EOF
if { (eval echo configure:3825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_shmat=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_shmat=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  :
else
  echo "$ac_t""no" 1>&6
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
echo "configure:3843: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lipc  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3851 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shmat();

int main() {
shmat()
; return 0; }
EOF
if { (eval echo configure:3862: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
else
  echo "$ac_t""no" 1>&6
fi

fi

   
   # Solaris 2.6 and others need -lresolv for res_init
   for ac_func in res_init
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:3889: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 3894 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char $ac_func(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char $ac_func();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif

; return 0; }
EOF
if { (eval echo configure:3917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi

if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
  cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
 
else
  echo "$ac_t""no" 1>&6
kde_libs_safe="$LIBS"
     LIBS="$LIBS $X_EXTRA_LIBS -lresolv"
     cat > conftest.$ac_ext <<EOF
#line 3941 "configure"
#include "confdefs.h"

#include <resolv.h>

int main() {
 
res_init(); 

; return 0; }
EOF
if { (eval echo configure:3952: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  LIBRESOLV="-lresolv"
        X_EXTRA_LIBS="$X_EXTRA_LIBS $LIBRESOLV"
        cat >> confdefs.h <<\EOF
#define HAVE_RES_INIT 1
EOF

     
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi
rm -f conftest*
     LIBS=$kde_libs_safe
   
fi
done


   LIBSOCKET="$X_EXTRA_LIBS"
   
   
   
   echo $ac_n "checking for killpg in -lucb""... $ac_c" 1>&6
echo "configure:3977: checking for killpg in -lucb" >&5
ac_lib_var=`echo ucb'_'killpg | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lucb  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3985 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char killpg();

int main() {
killpg()
; return 0; }
EOF
if { (eval echo configure:3996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBUCB="-lucb"
else
  echo "$ac_t""no" 1>&6
fi
    

   case $host in     *-*-lynxos* )
        echo $ac_n "checking LynxOS header file wrappers""... $ac_c" 1>&6
echo "configure:4019: checking LynxOS header file wrappers" >&5
        CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"
        echo "$ac_t""disabled" 1>&6
        echo $ac_n "checking for gethostbyname in -lbsd""... $ac_c" 1>&6
echo "configure:4023: checking for gethostbyname in -lbsd" >&5
ac_lib_var=`echo bsd'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lbsd  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4031 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char gethostbyname();

int main() {
gethostbyname()
; return 0; }
EOF
if { (eval echo configure:4042: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBSOCKET="-lbsd"
else
  echo "$ac_t""no" 1>&6
fi
          ;;
    esac

     echo $ac_n "checking size of int""... $ac_c" 1>&6
echo "configure:4065: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_int=4
else
  cat > conftest.$ac_ext <<EOF
#line 4073 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/types.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(int));
  exit(0);
}
EOF
if { (eval echo configure:4085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_int=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_int=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_int" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_INT $ac_cv_sizeof_int
EOF

  echo $ac_n "checking size of long""... $ac_c" 1>&6
echo "configure:4104: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_long=4
else
  cat > conftest.$ac_ext <<EOF
#line 4112 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/types.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(long));
  exit(0);
}
EOF
if { (eval echo configure:4124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_long=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_long=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_long" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_LONG $ac_cv_sizeof_long
EOF

  echo $ac_n "checking size of char *""... $ac_c" 1>&6
echo "configure:4143: checking size of char *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char_p'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_char_p=4
else
  cat > conftest.$ac_ext <<EOF
#line 4151 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/types.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(char *));
  exit(0);
}
EOF
if { (eval echo configure:4163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_char_p=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_char_p=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_char_p" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_CHAR_P $ac_cv_sizeof_char_p
EOF

  echo $ac_n "checking size of char""... $ac_c" 1>&6
echo "configure:4182: checking size of char" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_char'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  if test "$cross_compiling" = yes; then
  ac_cv_sizeof_char=1
else
  cat > conftest.$ac_ext <<EOF
#line 4190 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/types.h>
main()
{
  FILE *f=fopen("conftestval", "w");
  if (!f) exit(1);
  fprintf(f, "%d\n", sizeof(char));
  exit(0);
}
EOF
if { (eval echo configure:4202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
  ac_cv_sizeof_char=`cat conftestval`
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -fr conftest*
  ac_cv_sizeof_char=0
fi
rm -fr conftest*
fi

fi
echo "$ac_t""$ac_cv_sizeof_char" 1>&6
cat >> confdefs.h <<EOF
#define SIZEOF_CHAR $ac_cv_sizeof_char
EOF


   
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
echo "configure:4223: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldl  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4231 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dlopen();

int main() {
dlopen()
; return 0; }
EOF
if { (eval echo configure:4242: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
LIBDL="-ldl"
ac_cv_have_dlfcn=yes

else
  echo "$ac_t""no" 1>&6
fi


echo $ac_n "checking for shl_unload in -ldld""... $ac_c" 1>&6
echo "configure:4267: checking for shl_unload in -ldld" >&5
ac_lib_var=`echo dld'_'shl_unload | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-ldld  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4275 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char shl_unload();

int main() {
shl_unload()
; return 0; }
EOF
if { (eval echo configure:4286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  
LIBDL="-ldld"
ac_cv_have_shload=yes

else
  echo "$ac_t""no" 1>&6
fi






echo $ac_n "checking for extra includes""... $ac_c" 1>&6
echo "configure:4315: checking for extra includes" >&5
# Check whether --with-extra-includes or --without-extra-includes was given.
if test "${with_extra_includes+set}" = set; then
  withval="$with_extra_includes"
  kde_use_extra_includes="$withval"
else
  kde_use_extra_includes=NONE

fi

kde_extra_includes=
if test -n "$kde_use_extra_includes" && \
   test "$kde_use_extra_includes" != "NONE"; then

   ac_save_ifs=$IFS
   IFS=':'
   for dir in $kde_use_extra_includes; do
     kde_extra_includes="$kde_extra_includes $dir"
     USER_INCLUDES="$USER_INCLUDES -I$dir"
   done
   IFS=$ac_save_ifs
   kde_use_extra_includes="added"
else
   kde_use_extra_includes="no"
fi


echo "$ac_t""$kde_use_extra_includes" 1>&6

kde_extra_libs=
echo $ac_n "checking for extra libs""... $ac_c" 1>&6
echo "configure:4346: checking for extra libs" >&5
# Check whether --with-extra-libs or --without-extra-libs was given.
if test "${with_extra_libs+set}" = set; then
  withval="$with_extra_libs"
  kde_use_extra_libs=$withval
else
  kde_use_extra_libs=NONE

fi

if test -n "$kde_use_extra_libs" && \
   test "$kde_use_extra_libs" != "NONE"; then

   ac_save_ifs=$IFS
   IFS=':'
   for dir in $kde_use_extra_libs; do
     kde_extra_libs="$kde_extra_libs $dir"
     KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
     USER_LDFLAGS="$USER_LDFLAGS -L$dir"
   done
   IFS=$ac_save_ifs
   kde_use_extra_libs="added"
else
   kde_use_extra_libs="no"
fi



echo "$ac_t""$kde_use_extra_libs" 1>&6




echo $ac_n "checking for libz""... $ac_c" 1>&6
echo "configure:4380: checking for libz" >&5
if eval "test \"`echo '$''{'ac_cv_lib_z'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

kde_save_LIBS="$LIBS"
LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
kde_save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
cat > conftest.$ac_ext <<EOF
#line 4397 "configure"
#include "confdefs.h"

#include<zlib.h>

int main() {
return (zlibVersion() == ZLIB_VERSION); 
; return 0; }
EOF
if { (eval echo configure:4406: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_z='-lz'"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_z=no"
fi
rm -f conftest*
LIBS="$kde_save_LIBS"
CFLAGS="$kde_save_CFLAGS"

fi
if test ! "$ac_cv_lib_z" = no; then
  cat >> confdefs.h <<EOF
#define HAVE_LIBZ 1
EOF

  LIBZ="$ac_cv_lib_z"
  
  echo "$ac_t""$ac_cv_lib_z" 1>&6
else
  { echo "configure: error: not found. Check your installation and look into config.log" 1>&2; exit 1; }
  LIBZ=""
  
fi



# Check whether --enable-embedded or --disable-embedded was given.
if test "${enable_embedded+set}" = set; then
  enableval="$enable_embedded"
  kde_use_qt_emb=$enableval
else
  kde_use_qt_emb=no

fi


if test "$kde_use_qt_emb" = "no"; then

echo $ac_n "checking for X""... $ac_c" 1>&6
echo "configure:4449: checking for X" >&5

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

if eval "test \"`echo '$''{'kde_cv_have_x'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  # One or both of the vars are not set, and there is no cached value.
if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
   kde_x_includes=NO
else
   kde_x_includes=$x_includes
fi
if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
   kde_x_libraries=NO
else
   kde_x_libraries=$x_libraries
fi

# below we use the standard autoconf calls
ac_x_libraries=$kde_x_libraries
ac_x_includes=$kde_x_includes

if test "$ac_x_includes" = NO; then
  # Guess where to find include files, by looking for this one X11 .h file.
  test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h

  # First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
#line 4483 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:4488: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  # We can compile using X headers with no special include directory.
ac_x_includes=
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  # Look for the header file in a standard set of common directories.
# Check X11 before X11Rn because it is often a symlink to the current release.
  for ac_dir in               \
    /usr/X11/include          \
    /usr/X11R6/include        \
    /usr/X11R5/include        \
    /usr/X11R4/include        \
                              \
    /usr/include/X11          \
    /usr/include/X11R6        \
    /usr/include/X11R5        \
    /usr/include/X11R4        \
                              \
    /usr/local/X11/include    \
    /usr/local/X11R6/include  \
    /usr/local/X11R5/include  \
    /usr/local/X11R4/include  \
                              \
    /usr/local/include/X11    \
    /usr/local/include/X11R6  \
    /usr/local/include/X11R5  \
    /usr/local/include/X11R4  \
                              \
    /usr/X386/include         \
    /usr/x386/include         \
    /usr/XFree86/include/X11  \
                              \
    /usr/include              \
    /usr/local/include        \
    /usr/unsupported/include  \
    /usr/athena/include       \
    /usr/local/x11r5/include  \
    /usr/lpp/Xamples/include  \
                              \
    /usr/openwin/include      \
    /usr/openwin/share/include \
    ; \
  do
    if test -r "$ac_dir/$x_direct_test_include"; then
      ac_x_includes=$ac_dir
      break
    fi
  done
fi
rm -f conftest*
fi # $ac_x_includes = NO

if test "$ac_x_libraries" = NO; then
  # Check for the libraries.

  test -z "$x_direct_test_library" && x_direct_test_library=Xt
  test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc

  # See if we find them without any special options.
  # Don't add to $LIBS permanently.
  ac_save_LIBS="$LIBS"
  LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4557 "configure"
#include "confdefs.h"

int main() {
${x_direct_test_function}()
; return 0; }
EOF
if { (eval echo configure:4564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
ac_x_libraries=
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  LIBS="$ac_save_LIBS"
# First see if replacing the include by lib works.
# Check X11 before X11Rn because it is often a symlink to the current release.
for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
    /usr/X11/lib          \
    /usr/X11R6/lib        \
    /usr/X11R5/lib        \
    /usr/X11R4/lib        \
                          \
    /usr/lib/X11          \
    /usr/lib/X11R6        \
    /usr/lib/X11R5        \
    /usr/lib/X11R4        \
                          \
    /usr/local/X11/lib    \
    /usr/local/X11R6/lib  \
    /usr/local/X11R5/lib  \
    /usr/local/X11R4/lib  \
                          \
    /usr/local/lib/X11    \
    /usr/local/lib/X11R6  \
    /usr/local/lib/X11R5  \
    /usr/local/lib/X11R4  \
                          \
    /usr/X386/lib         \
    /usr/x386/lib         \
    /usr/XFree86/lib/X11  \
                          \
    /usr/lib              \
    /usr/local/lib        \
    /usr/unsupported/lib  \
    /usr/athena/lib       \
    /usr/local/x11r5/lib  \
    /usr/lpp/Xamples/lib  \
    /lib/usr/lib/X11	  \
                          \
    /usr/openwin/lib      \
    /usr/openwin/share/lib \
    ; \
do
  for ac_extension in a so sl; do
    if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
      ac_x_libraries=$ac_dir
      break 2
    fi
  done
done
fi
rm -f conftest*
fi # $ac_x_libraries = NO

case "$host" in
mips-sgi-irix6*)
  ;;
*-*-solaris*)
  ;;
*)
  rm -fr conftestdir
if mkdir conftestdir; then
  cd conftestdir
  # Make sure to not put "make" in the Imakefile rules, since we grep it out.
  cat > Imakefile <<'EOF'
acfindx:
	@echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
EOF
  if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
    eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
    # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
    for ac_extension in a so sl; do
      if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
        test -f $ac_im_libdir/libX11.$ac_extension; then
        ac_im_usrlibdir=$ac_im_libdir; break
      fi
    done
    # Screen out bogus values from the imake configuration.  They are
    # bogus both because they are the default anyway, and because
    # using them would break gcc on systems where it needs fixed includes.
    case "$ac_im_incroot" in
	/usr/include) ;;
	*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
    esac
    case "$ac_im_usrlibdir" in
	/usr/lib | /lib) ;;
	*) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
    esac
  fi
  cd ..
  rm -fr conftestdir
fi

  if test -z "$ac_x_includes"; then
    ac_x_includes="."
  fi
  if test -z "$ac_x_libraries"; then
    ac_x_libraries="/usr/lib"
  fi
esac
#from now on we use our own again

# when the user already gave --x-includes, we ignore
# what the standard autoconf macros told us.
if test "$kde_x_includes" = NO; then
  kde_x_includes=$ac_x_includes
fi

# for --x-libraries too
if test "$kde_x_libraries" = NO; then
  kde_x_libraries=$ac_x_libraries
fi

if test "$kde_x_includes" = NO; then
  { echo "configure: error: Can't find X includes. Please check your installation and add the correct paths!" 1>&2; exit 1; }
fi

if test "$kde_x_libraries" = NO; then
  { echo "configure: error: Can't find X libraries. Please check your installation and add the correct paths!" 1>&2; exit 1; }
fi

# Record where we found X for the cache.
kde_cv_have_x="have_x=yes \
         kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"

fi

eval "$kde_cv_have_x"

if test "$have_x" != yes; then
  echo "$ac_t""$have_x" 1>&6
  no_x=yes
else
  echo "$ac_t""libraries $kde_x_libraries, headers $kde_x_includes" 1>&6
fi

if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
  X_INCLUDES=""
  x_includes=".";  else
  x_includes=$kde_x_includes
  X_INCLUDES="-I$x_includes"
fi

if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE; then
  X_LDFLAGS=""
  x_libraries="/usr/lib";  else
  x_libraries=$kde_x_libraries
  X_LDFLAGS="-L$x_libraries"
fi
all_includes="$X_INCLUDES"
all_libraries="$X_LDFLAGS"






# Check for libraries that X11R6 Xt/Xaw programs need.
ac_save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $X_LDFLAGS"
# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
# check for ICE first), but we must link in the order -lSM -lICE or
# we get undefined symbols.  So assume we have SM if we have ICE.
# These have to be linked with before -lX11, unlike the other
# libraries we check for below, so use a different variable.
#  --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
echo "configure:4738: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
#line 4746 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char IceConnectionNumber();

int main() {
IceConnectionNumber()
; return 0; }
EOF
if { (eval echo configure:4757: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBSM="-lSM -lICE"
else
  echo "$ac_t""no" 1>&6
fi


LDFLAGS="$ac_save_LDFLAGS"



LIB_X11='-lX11 $(LIBSOCKET)'


echo $ac_n "checking for libXext""... $ac_c" 1>&6
echo "configure:4786: checking for libXext" >&5
if eval "test \"`echo '$''{'kde_cv_have_libXext'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
kde_ldflags_safe="$LDFLAGS"
kde_libs_safe="$LIBS"

LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
LIBS="-lXext -lX11 $LIBSOCKET"

cat > conftest.$ac_ext <<EOF
#line 4798 "configure"
#include "confdefs.h"

#include <stdio.h>
#ifdef STDC_HEADERS
# include <stdlib.h>
#endif

int main() {

printf("hello Xext\n");

; return 0; }
EOF
if { (eval echo configure:4812: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  kde_cv_have_libXext=yes
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  kde_cv_have_libXext=no
   
fi
rm -f conftest*

LDFLAGS=$kde_ldflags_safe
LIBS=$kde_libs_safe
 
fi


echo "$ac_t""$kde_cv_have_libXext" 1>&6

if test "$kde_cv_have_libXext" = "no"; then
  { echo "configure: error: We need a working libXext to proceed. Since configure
can't find it itself, we stop here assuming that make wouldn't find
them either." 1>&2; exit 1; }
fi

echo $ac_n "checking for Xinerama""... $ac_c" 1>&6
echo "configure:4839: checking for Xinerama" >&5

 # Check whether --with-xinerama or --without-xinerama was given.
if test "${with_xinerama+set}" = set; then
  withval="$with_xinerama"
  
    no_xinerama=no
  
else
  
    no_xinerama=yes
  

fi


kde_save_LDFLAGS="$LDFLAGS"
kde_save_CFLAGS="$CFLAGS"
kde_save_LIBS="$LIBS"
LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
CFLAGS="$CFLAGS -I$x_includes"
LIBS="-lXinerama -lXext"

if test "x$no_xinerama" = "xno"; then

  if eval "test \"`echo '$''{'ac_cv_have_xinerama'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
	  cat > conftest.$ac_ext <<EOF
#line 4869 "configure"
#include "confdefs.h"
#include <X11/Xlib.h>
  			#include <X11/extensions/Xinerama.h>
int main() {
XineramaIsActive(NULL);
; return 0; }
EOF
if { (eval echo configure:4877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  ac_cv_have_xinerama="yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  ac_cv_have_xinerama="no"
fi
rm -f conftest*
  
fi

else
  ac_cv_have_xinerama=no;
fi

echo "$ac_t""$ac_cv_have_xinerama" 1>&6

LIBXINERAMA=""

if test "$ac_cv_have_xinerama" = "yes"; then
  cat >> confdefs.h <<\EOF
#define HAVE_XINERAMA 1
EOF

  LIBXINERAMA="-lXinerama"
fi



LDFLAGS="$kde_save_LDFLAGS"
CFLAGS="$kde_save_CFLAGS"
LIBS="$kde_save_LIBS"

LIB_XEXT="-lXext"
QTE_NORTTI=""

else
    CXXFLAGS="$CXXFLAGS -DQWS"
  CFLAGS="$CFLAGS -DQWS"
  LDFLAGS="$LDFLAGS -DQWS"
  QTE_NORTTI="-DQWS"
  X_PRE_LIBS=""
  LIB_X11=""
  LIB_XEXT=""
  LIBSM=""
  X_INCLUDES=""
  X_LDFLAGS=""
  x_includes=""
  x_libraries=""
  
  
  
  
  
  
  
fi




ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross





if test -z ""; then
  kde_qtver=2
  kde_qtsubver=2
else
  kde_qtsubver=`echo "" | sed -e 's#[0-9]\+\.\([0-9]\+\).*#\1#'`
  # following is the check if subversion isnt found in passed argument
  if test "$kde_qtsubver" = ""; then
    kde_qtsubver=1
  fi
  kde_qtver=`echo "" | sed -e 's#^\([0-9]\+\)\..*#\1#'`
  if test "$kde_qtver" = "1"; then
    kde_qtsubver=42
  fi
fi

if test -z ""; then
  if test "$kde_qtver" = "2"; then
    if test $kde_qtsubver -gt 0; then
      kde_qt_minversion=">= Qt 2.2.2"
    else
      kde_qt_minversion=">= Qt 2.0.2"
    fi
  fi
  if test "$kde_qtver" = "3"; then
    kde_qt_minversion=">= Qt 3.0.0-beta6"
  fi
  if test "$kde_qtver" = "1"; then
    kde_qt_minversion=">= 1.42 and < 2.0"
  fi
else
   kde_qt_minversion=
fi

if test -z ""; then
   if test $kde_qtver = 3; then
     kde_qt_verstring="QT_VERSION >= 300"
   fi
   if test $kde_qtver = 2; then
     if test $kde_qtsubver -gt 0; then
       kde_qt_verstring="QT_VERSION >= 222"
     else
       kde_qt_verstring="QT_VERSION >= 200"
     fi
   fi
   if test $kde_qtver = 1; then
    kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200"
   fi
else
   kde_qt_verstring=
fi

if test $kde_qtver = 3; then
  kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt"
fi 
if test $kde_qtver = 2; then
   kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
fi
if test $kde_qtver = 1; then
   kde_qt_dirs="$QTDIR /usr/lib/qt"
fi


echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
echo "configure:5014: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-lpthread  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5022 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char pthread_create();

int main() {
pthread_create()
; return 0; }
EOF
if { (eval echo configure:5033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBPTHREAD="-lpthread" 
else
  echo "$ac_t""no" 1>&6
fi




    # Check whether --enable-kernel-threads or --disable-kernel-threads was given.
if test "${enable_kernel_threads+set}" = set; then
  enableval="$enable_kernel_threads"
  kde_use_kernthreads=$enableval
else
  kde_use_kernthreads=no
fi


    if test "$kde_use_kernthreads" = "yes"; then
      ac_save_CXXFLAGS="$CXXFLAGS"
      ac_save_CFLAGS="$CXXFLAGS"
      CXXFLAGS="-I/usr/local/include/pthread/linuxthreads $CXXFLAGS"
      CFLAGS="-I/usr/local/include/pthread/linuxthreads $CFLAGS"
      for ac_hdr in pthread/linuxthreads/pthread.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:5074: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  cat > conftest.$ac_ext <<EOF
#line 5079 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:5084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=yes"
else
  echo "$ac_err" >&5
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
  echo "$ac_t""yes" 1>&6
    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
  cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
 
else
  echo "$ac_t""no" 1>&6
fi
done

      CXXFLAGS="$ac_save_CXXFLAGS"
      CFLAGS="$ac_save_CFLAGS"
      if test "$ac_cv_header_pthread_linuxthreads_pthread_h" = "no"; then
        kde_use_kernthreads=no
      else
                echo $ac_n "checking for pthread_join in -llthread""... $ac_c" 1>&6
echo "configure:5116: checking for pthread_join in -llthread" >&5
ac_lib_var=`echo lthread'_'pthread_join | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  ac_save_LIBS="$LIBS"
LIBS="-llthread  $LIBS"
cat > conftest.$ac_ext <<EOF
#line 5124 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char pthread_join();

int main() {
pthread_join()
; return 0; }
EOF
if { (eval echo configure:5135: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=yes"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"

fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
  echo "$ac_t""yes" 1>&6
  LIBPTHREAD="-llthread -llgcc_r"
else
  echo "$ac_t""no" 1>&6
fi
         if test "x$LIBPTHREAD" = "x"; then
          kde_use_kernthreads=no
        else
          USE_THREADS="-D_THREAD_SAFE -I/usr/local/include/pthread/linuxthreads"
        fi
      fi
    else 
      USE_THREADS=""
      if test -z "$LIBPTHREAD"; then
        
echo $ac_n "checking whether $CXX supports -pthread""... $ac_c" 1>&6
echo "configure:5165: checking whether $CXX supports -pthread" >&5
kde_cache=`echo pthread | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -pthread -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -pthread -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 USE_THREADS="-pthread" 
else
 echo "$ac_t""no" 1>&6
 :
 
fi

      fi
    fi

    case $host_os in
 	solaris*)
		
echo $ac_n "checking whether $CXX supports -mt""... $ac_c" 1>&6
echo "configure:5199: checking whether $CXX supports -mt" >&5
kde_cache=`echo mt | sed 'y%.=/+-%___p_%'`
if eval "test \"`echo '$''{'kde_cv_prog_cxx_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
echo 'int main() { return 0; }' >conftest.cc
eval "kde_cv_prog_cxx_$kde_cache=no"
if test -z "`$CXX -mt -c conftest.cc 2>&1`"; then
  if test -z "`$CXX -mt -o conftest conftest.o 2>&1`"; then
    eval "kde_cv_prog_cxx_$kde_cache=yes"
  fi
fi
rm -f conftest*

fi

if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
 echo "$ac_t""yes" 1>&6
 :
 USE_THREADS="-mt"
else
 echo "$ac_t""no" 1>&6
 :
 
fi

                CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4"
                echo "Setting Solaris pthread compilation options"
    		;;
        freebsd*)
                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
                echo "Setting FreeBSD pthread compilation options"
                ;;
        aix*)
                CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
                LIBPTHREAD="$LIBPTHREAD -lc_r"
                echo "Setting AIX pthread compilation options"
                ;;
        linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT"
                USE_THREADS="$USE_THREADS -DPIC -fPIC"
                echo "Setting Linux pthread compilation options"
                ;;
	*)
		;;
    esac
    
    




echo $ac_n "checking for libpng""... $ac_c" 1>&6
echo "configure:5252: checking for libpng" >&5
if eval "test \"`echo '$''{'ac_cv_lib_png'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
kde_save_LIBS="$LIBS"
if test "x$kde_use_qt_emb" != "xyes"; then
LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
else
LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm"
fi
kde_save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

cat > conftest.$ac_ext <<EOF
#line 5273 "configure"
#include "confdefs.h"
    
    #include<png.h>
    
int main() {

    png_structp png_ptr = png_create_read_struct(  /* image ptr */
		PNG_LIBPNG_VER_STRING, 0, 0, 0 );
    return( png_ptr != 0 );
    
; return 0; }
EOF
if { (eval echo configure:5286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_png='-lpng $LIBZ -lm'"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_png=no"

fi
rm -f conftest*
LIBS="$kde_save_LIBS"
CFLAGS="$kde_save_CFLAGS"

fi
if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
  cat >> confdefs.h <<EOF
#define HAVE_LIBPNG 1
EOF

  LIBPNG="$ac_cv_lib_png"
  
  echo "$ac_t""$ac_cv_lib_png" 1>&6
else
  echo "$ac_t""no" 1>&6
  LIBPNG=""
  
fi



echo $ac_n "checking for libjpeg6b""... $ac_c" 1>&6
echo "configure:5318: checking for libjpeg6b" >&5
if eval "test \"`echo '$''{'ac_cv_lib_jpeg_6b'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_save_LIBS="$LIBS"
LIBS="$all_libraries $USER_LDFLAGS -ljpeg6b -lm"
ac_save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
cat > conftest.$ac_ext <<EOF
#line 5335 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
struct jpeg_decompress_struct;
typedef struct jpeg_decompress_struct * j_decompress_ptr;
typedef int size_t;
#ifdef __cplusplus
extern "C" {
#endif
    void jpeg_CreateDecompress(j_decompress_ptr cinfo,
                                    int version, size_t structsize);
#ifdef __cplusplus
}
#endif
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */

int main() {
jpeg_CreateDecompress(0L, 0, 0);
; return 0; }
EOF
if { (eval echo configure:5356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_jpeg_6b=-ljpeg6b"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_jpeg_6b=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
CFLAGS="$ac_save_CFLAGS"

fi


if eval "test ! \"`echo $ac_cv_lib_jpeg_6b`\" = no"; then
  LIBJPEG="$ac_cv_lib_jpeg_6b"
  echo "$ac_t""$ac_cv_lib_jpeg_6b" 1>&6
else
  echo "$ac_t""no" 1>&6
  
echo $ac_n "checking for libjpeg""... $ac_c" 1>&6
echo "configure:5379: checking for libjpeg" >&5
if eval "test \"`echo '$''{'ac_cv_lib_jpeg_normal'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

ac_save_LIBS="$LIBS"
LIBS="$all_libraries $USER_LDFLAGS -ljpeg -lm"
ac_save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
cat > conftest.$ac_ext <<EOF
#line 5396 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
struct jpeg_decompress_struct;
typedef struct jpeg_decompress_struct * j_decompress_ptr;
typedef int size_t;
#ifdef __cplusplus
extern "C" {
#endif
    void jpeg_CreateDecompress(j_decompress_ptr cinfo,
                                    int version, size_t structsize);
#ifdef __cplusplus
}
#endif
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */

int main() {
jpeg_CreateDecompress(0L, 0, 0);
; return 0; }
EOF
if { (eval echo configure:5417: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
  rm -rf conftest*
  eval "ac_cv_lib_jpeg_normal=-ljpeg"
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  rm -rf conftest*
  eval "ac_cv_lib_jpeg_normal=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
CFLAGS="$ac_save_CFLAGS"

fi


if eval "test ! \"`echo $ac_cv_lib_jpeg_normal`\" = no"; then
  LIBJPEG="$ac_cv_lib_jpeg_normal"
  echo "$ac_t""$ac_cv_lib_jpeg_normal" 1>&6
else
  echo "$ac_t""no" 1>&6
  
       LIBJPEG=
    
   
fi



fi



jpeg_incdirs="/usr/include /usr/local/include $kde_extra_includes"

jpeg_incdir=NO
for i in $jpeg_incdirs;
do
  for j in jpeglib.h;
  do
    echo "configure: 5457: $i/$j" >&5
    if test -r "$i/$j"; then
      echo "taking that" >&5
      jpeg_incdir=$i
      break 2
    fi
  done
done

test "x$jpeg_incdir" = xNO && jpeg_incdir=

if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
  cat >> confdefs.h <<EOF
#define HAVE_LIBJPEG 1
EOF

else
  if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
    echo "configure: warning: 
There is an installation error in jpeg support. You seem to have only one
of either the headers _or_ the libraries installed. You may need to either
provide correct --with-extra-... options, or the development package of
libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
Disabling JPEG support.
" 1>&2
  else
    echo "configure: warning: libjpeg not found. disable JPEG support." 1>&2
  fi
  jpeg_incdir=
  LIBJPEG=
fi









# Check whether --enable-mt or --disable-mt was given.
if test "${enable_mt+set}" = set; then
  enableval="$enable_mt"
  kde_use_qt_mt=$enableval
else
  
    if test $kde_qtver = 3; then
      kde_use_qt_mt=yes
    else
      kde_use_qt_mt=no
    fi
  

fi


USING_QT_MT=""


KDE_MT_LDFLAGS=
if test "x$kde_use_qt_mt" = "xyes"; then
  
  
  
    if test -z "$LIBPTHREAD"; then
    if test -z "$USE_THREADS"; then
      kde_check_threading_default=no
    else
      kde_check_threading_default=yes
    fi
  else
    kde_check_threading_default=yes
  fi
  # Check whether --enable-threading or --disable-threading was given.
if test "${enable_threading+set}" = set; then
  enableval="$enable_threading"
  kde_use_threading=$enableval
else
  kde_use_threading=$kde_check_threading_default
fi

  if test "x$kde_use_threading" = "xyes"; then
    cat >> confdefs.h <<\EOF
#define HAVE_LIBPTHREAD 1
EOF

  fi

  if test "x$kde_use_threading" = "xyes"; then
    CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS"
    KDE_MT_LDFLAGS="$USE_THREADS $LIBPTHREAD"
  else
    kde_use_qt_mt=no
  fi
fi


kde_qt_was_given=yes

if test -z "$LIBQT_GLOB"; then
  if test "x$kde_use_qt_emb" = "xyes"; then
    LIBQT_GLOB="libqte.*"
  else
    LIBQT_GLOB="libqt.*"
  fi
fi

if test -z "$LIBQT"; then
  if test "x$kde_use_qt_emb" = "xyes"; then
    qtlib="qte"
  else
    qtlib="qt"
  fi
 
  LIBQT="-l$qtlib"
  kde_int_qt="-l$qtlib"
fi


if test "x$kde_use_qt_mt" = "xyes"; then
  LIBQT="-l$qtlib-mt"
  kde_int_qt="-l$qtlib-mt"
  LIBQT_GLOB="lib$qtlib-mt.*"
  USING_QT_MT="using -mt"
fi

if test $kde_qtver != 1; then

  
  
  LIBQT="$LIBQT $LIBPNG $LIBJPEG"
fi

echo $ac_n "checking for Qt""... $ac_c" 1>&6
echo "configure:5591: checking for Qt" >&5

if test "x$kde_use_qt_emb" != "xyes"; then
LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
fi
ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
qt_libraries=""
qt_includes=""
# Check whether --with-qt-dir or --without-qt-dir was given.
if test "${with_qt_dir+set}" = set; then
  withval="$with_qt_dir"
    ac_qt_includes="$withval"/include
       ac_qt_libraries="$withval"/lib
       ac_qt_bindir="$withval"/bin
    
fi


# Check whether --with-qt-includes or --without-qt-includes was given.
if test "${with_qt_includes+set}" = set; then
  withval="$with_qt_includes"
  
       ac_qt_includes="$withval"
    
fi


kde_qt_libs_given=no

# Check whether --with-qt-libraries or --without-qt-libraries was given.
if test "${with_qt_libraries+set}" = set; then
  withval="$with_qt_libraries"
    ac_qt_libraries="$withval"
       kde_qt_libs_given=yes
    
fi


if eval "test \"`echo '$''{'ac_cv_have_qt'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  #try to guess Qt locations

qt_incdirs=""
for dir in $kde_qt_dirs; do
   qt_incdirs="$qt_incdirs $dir/include $dir"
done
qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 $x_includes"
if test ! "$ac_qt_includes" = "NO"; then
   qt_incdirs="$ac_qt_includes $qt_incdirs"
fi

if test "$kde_qtver" != "1"; then
  kde_qt_header=qstyle.h
else
  kde_qt_header=qglobal.h
fi


qt_incdir=NO
for i in $qt_incdirs;
do
  for j in $kde_qt_header;
  do
    echo "configure: 5655: $i/$j" >&5
    if test -r "$i/$j"; then
      echo "taking that" >&5
      qt_incdir=$i
      break 2
    fi
  done
done

ac_qt_includes="$qt_incdir"

qt_libdirs=""
for dir in $kde_qt_dirs; do
   qt_libdirs="$qt_libdirs $dir/lib $dir"
done
qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
if test ! "$ac_qt_libraries" = "NO"; then
  qt_libdir=$ac_qt_libraries
else
  qt_libdirs="$ac_qt_libraries $qt_libdirs"
  # if the Qt was given, the chance is too big that libqt.* doesn't exist
  qt_libdir=NONE
  for dir in $qt_libdirs; do
    try="ls -1 $dir/${LIBQT_GLOB}"
    if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&5 ; fi
  done
fi

ac_qt_libraries="$qt_libdir"


 ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross

ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'



ac_cxxflags_safe="$CXXFLAGS"
ac_ldflags_safe="$LDFLAGS"
ac_libs_safe="$LIBS"

CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS"
LIBS="$LIBS $LIBQT"



cat > conftest.$ac_ext <<EOF
#include "confdefs.h"
#include <qglobal.h>
#include <qapplication.h>
EOF
if test "$kde_qtver" = "2"; then
cat >> conftest.$ac_ext <<EOF
#include <qevent.h>
#include <qstring.h>
#include <qstyle.h>
EOF

if test $kde_qtsubver -gt 0; then
cat >> conftest.$ac_ext <<EOF
#include <qiconview.h>
EOF
fi
fi

if test "$kde_qtver" = "3"; then
cat >> conftest.$ac_ext <<EOF
#include <qstylefactory.h>
#include <private/qucomextra_p.h>
EOF
fi

echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
cat >> conftest.$ac_ext <<EOF
#error 1
#endif

int main() {
EOF
if test "$kde_qtver" = "2"; then
cat >> conftest.$ac_ext <<EOF
    QStringList *t = new QStringList();
EOF
if test $kde_qtsubver -gt 0; then
cat >> conftest.$ac_ext <<EOF
    QIconView iv(0);
    iv.setWordWrapIconText(false);
    QString s;
    s.setLatin1("Elvis is alive", 14);
    int magnolia = QEvent::Speech; /* new in 2.2 beta2 */
EOF
fi
fi
if test "$kde_qtver" = "3"; then
cat >> conftest.$ac_ext <<EOF
    (void)QStyleFactory::create(QString::null);
EOF
fi
cat >> conftest.$ac_ext <<EOF
    return 0;
}
EOF


if { (eval echo configure:5765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
  rm -f conftest*
else
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
  ac_qt_libraries="NO"
fi
rm -f conftest*
CXXFLAGS="$ac_cxxflags_safe"
LDFLAGS="$ac_ldflags_safe"
LIBS="$ac_libs_safe"

ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross

if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
  ac_cv_have_qt="have_qt=no"
  ac_qt_notfound=""
  if test "$ac_qt_includes" = NO; then
    if test "$ac_qt_libraries" = NO; then
      ac_qt_notfound="(headers and libraries)";
    else
      ac_qt_notfound="(headers)";
    fi
  else
    ac_qt_notfound="(libraries)";
  fi

  { echo "configure: error: Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
For more details about this problem, look at the end of config.log." 1>&2; exit 1; }
else
  have_qt="yes"
fi

fi


eval "$ac_cv_have_qt"

if test "$have_qt" != yes; then
  echo "$ac_t""$have_qt" 1>&6;
else
  ac_cv_have_qt="have_qt=yes \
    ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
  echo "$ac_t""libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT" 1>&6

  qt_libraries="$ac_qt_libraries"
  qt_includes="$ac_qt_includes"
fi

if test ! "$kde_qt_libs_given" = "yes"; then


echo $ac_n "checking if Qt compiles without flags""... $ac_c" 1>&6
echo "configure:5823: checking if Qt compiles without flags" >&5
if eval "test \"`echo '$''{'kde_cv_qt_direct'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  

 ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cxx_cross

ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'


ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
ac_LIBRARY_PATH="$LIBRARY_PATH"
ac_cxxflags_safe="$CXXFLAGS"
ac_ldflags_safe="$LDFLAGS"
ac_libs_safe="$LIBS"

CXXFLAGS="$CXXFLAGS -I$qt_includes"
LDFLAGS="$LDFLAGS $X_LDFLAGS"
if test "x$kde_use_qt_emb" != "xyes"; then
LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
else
LIBS="$LIBQT $LIBSOCKET"
fi
LD_LIBRARY_PATH=
export LD_LIBRARY_PATH
LIBRARY_PATH=
export LIBRARY_PATH



cat > conftest.$ac_ext <<EOF
#include "confdefs.h"
#include <qglobal.h>
#include <qapplication.h>
EOF
if test "$kde_qtver" = "2"; then
cat >> conftest.$ac_ext <<EOF
#include <qevent.h>
#include <qstring.h>
#include <qstyle.h>
EOF

if test $kde_qtsubver -gt 0; then
cat >> conftest.$ac_ext <<EOF
#include <qiconview.h>
EOF
fi
fi

if test "$kde_qtver" = "3"; then
cat >> conftest.$ac_ext <<EOF
#include <qstylefactory.h>
#include <private/qucomextra_p.h>
EOF
fi

echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
cat >> conftest.$ac_ext <<EOF
#error 1
#endif

int main() {
EOF
if test "$kde_qtver" = "2"; then
cat >> conftest.$ac_ext <<EOF
    QStringList *t = new QStringList();
EOF
if test $kde_qtsubver -gt 0; then
cat >> conftest.$ac_ext <<EOF
    QIconView iv(0);
    iv.setWordWrapIconText(false);
    QString s;
    s.setLatin1("Elvis is alive", 14);
    int magnolia = QEvent::Speech; /* new in 2.2 beta2 */
EOF
fi
fi
if test "$kde_qtver" = "3"; then
cat >> conftest.$ac_ext <<EOF
    (void)QStyleFactory::create(QString::null);
EOF
fi
cat >> conftest.$ac_ext <<EOF
    return 0;
}
EOF


if { (eval echo configure:5917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
  kde_cv_qt_direct="yes"
else
  kde_cv_qt_direct="no"
  echo "configure: failed program was:" >&5
  cat conftest.$ac_ext >&5
fi

rm -f conftest*
CXXFLAGS="$ac_cxxflags_safe"
LDFLAGS="$ac_ldflags_safe"
LIBS="$ac_libs_safe"

LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
export LD_LIBRARY_PATH
LIBRARY_PATH="$ac_LIBRARY_PATH"
export LIBRARY_PATH
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross


fi


if test "$kde_cv_qt_direct" = "yes"; then
  echo "$ac_t""yes" 1>&6
  qt_libraries= 
else
  echo "$ac_t""no" 1>&6
  
fi

fi




if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
 QT_INCLUDES=""
else
 QT_INCLUDES="-I$qt_includes"
 all_includes="$QT_INCLUDES $all_includes"
fi

if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
 QT_LDFLAGS=""
else
 QT_LDFLAGS="-L$qt_libraries"
 all_libraries="$all_libraries $QT_LDFLAGS"
fi
test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS"




   qt_bindirs=""
   for dir in $kde_qt_dirs; do
      qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
   done
   qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
   if test ! "$ac_qt_bindir" = "NO"; then
      qt_bindirs="$ac_qt_bindir $qt_bindirs"
   fi

   
   echo $ac_n "checking for moc""... $ac_c" 1>&6
echo "configure:5987: checking for moc" >&5
   if test -n "$MOC"; then
        kde_cv_path="$MOC";
   else
        kde_cache=`echo moc | sed 'y%./+-%__p_%'`

        if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
        kde_cv_path="NONE"
	dirs="$qt_bindirs"
	kde_save_IFS=$IFS
	IFS=':'
	for dir in $PATH; do
	  dirs="$dirs $dir"
        done
	IFS=$kde_save_IFS

        for dir in $dirs; do
	  if test -x "$dir/moc"; then
	    if test -n ""
	    then
              evalstr="$dir/moc  2>&1 "
	      if eval $evalstr; then
                kde_cv_path="$dir/moc"
                break
	      fi
            else
		kde_cv_path="$dir/moc"
                break
	    fi
          fi
        done

        eval "kde_cv_path_$kde_cache=$kde_cv_path"

        
fi


      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""

   fi

   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
      echo "$ac_t""not found" 1>&6
      
    { echo "configure: error: No Qt meta object compiler (moc) found!
Please check whether you installed Qt correctly.
You need to have a running moc binary.
configure tried to run $ac_cv_path_moc and the test didn't
succeed. If configure shouldn't have tried this one, set
the environment variable MOC to the right one before running
configure.
" 1>&2; exit 1; }

   else
      echo "$ac_t""$kde_cv_path" 1>&6
      MOC=$kde_cv_path

   fi

   if test -z "$UIC_NOT_NEEDED"; then
     
   echo $ac_n "checking for uic""... $ac_c" 1>&6
echo "configure:6053: checking for uic" >&5
   if test -n "$UIC"; then
        kde_cv_path="$UIC";
   else
        kde_cache=`echo uic | sed 'y%./+-%__p_%'`

        if eval "test \"`echo '$''{'kde_cv_path_$kde_cache'+set}'`\" = set"; then
  echo $ac_n "(cached) $ac_c" 1>&6
else
  
        kde_cv_path="NONE"
	dirs="$qt_bindirs"
	kde_save_IFS=$IFS
	IFS=':'
	for dir in $PATH; do
	  dirs="$dirs $dir"
        done
	IFS=$kde_save_IFS

        for dir in $dirs; do
	  if test -x "$dir/uic"; then
	    if test -n ""
	    then
              evalstr="$dir/uic  2>&1 "
	      if eval $evalstr; then
                kde_cv_path="$dir/uic"
                break
	      fi
            else
		kde_cv_path="$dir/uic"
                break
	    fi
          fi
        done

        eval "kde_cv_path_$kde_cache=$kde_cv_path"

        
fi


      eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""

   fi

   if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
      echo "$ac_t""not found" 1>&6
      UIC=""
   else
      echo "$ac_t""$kde_cv_path" 1>&6
      UIC=$kde_cv_path

   fi

     if test -z "$UIC" ; then
       
    echo "configure: warning: No Qt ui compiler (uic) found!
Please check whether you installed Qt correctly.
You need to have a running uic binary.
configure tried to run $ac_cv_path_uic and the test didn't
succeed. If configure shouldn't have tried this one, set
the environment variable UIC to the right one before running
configure.
" 1>&2

       exit 1
     fi
   else
     UIC="echo uic not available: "
   fi

   
   

   UIC_TR="i18n"
   if test $kde_qtver = 3; then
     UIC_TR="QT_KDE_I18N"
   fi

   


if test "x$kde_use_qt_emb" != "xyes"; then
LIB_QT="$kde_int_qt "'$(LIBPNG) $(LIBJPEG) -lXext $(LIB_X11) $(LIBSM)'
else
LIB_QT="$kde_int_qt "'$(LIBPNG) $(LIBJPEG)'
fi











DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"

if test ! -s $srcdir/subdirs; then
    TOPSUBDIRS=""
  files=`cd $srcdir && ls -1`
  dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
  for i in $dirs; do
    echo $i >> $srcdir/subdirs
  done
fi

if test -s $srcdir/inst-apps; then
  ac_topsubdirs="`cat $srcdir/inst-apps`"
else
  ac_topsubdirs="`cat $srcdir/subdirs`"
fi

for i in $ac_topsubdirs; do
  echo $ac_n "checking if $i should be compiled""... $ac_c" 1>&6
echo "configure:6170: checking if $i should be compiled" >&5
  if test -d $srcdir/$i; then
    install_it="yes"
    for j in $DO_NOT_COMPILE; do
      if test $i = $j; then
        install_it="no"
      fi
    done
  else
    install_it="no"
  fi
  echo "$ac_t""$install_it" 1>&6
  if test $install_it = "yes"; then
    TOPSUBDIRS="$TOPSUBDIRS $i"
  fi
done




trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs.  It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already.  You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
  case `(ac_space=' '; set | grep ac_space) 2>&1` in
  *ac_space=\ *)
    # `set' does not quote correctly, so add quotes (double-quote substitution
    # turns \\\\ into \\, and sed turns \\ into \).
    sed -n \
      -e "s/'/'\\\\''/g" \
      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
    ;;
  *)
    # `set' quotes correctly as required by POSIX, so do not add quotes.
    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
    ;;
  esac >> confcache
if cmp -s $cache_file confcache; then
  :
else
  if test -w $cache_file; then
    echo "updating cache $cache_file"
    cat confcache > $cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
fi

trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15

DEFS=-DHAVE_CONFIG_H

# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}

echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.

ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
  case "\$ac_option" in
  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
    echo "$CONFIG_STATUS generated by autoconf version 2.13"
    exit 0 ;;
  -help | --help | --hel | --he | --h)
    echo "\$ac_cs_usage"; exit 0 ;;
  *) echo "\$ac_cs_usage"; exit 1 ;;
  esac
done

ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"

trap 'rm -fr `echo "Makefile qterm/Makefile qterm/docs/Makefile qterm/docs/en/Makefile qterm/pic/Makefile qterm/cursor/Makefile  config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF

# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
 s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
s%@ACLOCAL@%$ACLOCAL%g
s%@AUTOCONF@%$AUTOCONF%g
s%@AUTOMAKE@%$AUTOMAKE%g
s%@AUTOHEADER@%$AUTOHEADER%g
s%@MAKEINFO@%$MAKEINFO%g
s%@SET_MAKE@%$SET_MAKE%g
s%@CC@%$CC%g
s%@CXX@%$CXX%g
s%@USE_EXCEPTIONS@%$USE_EXCEPTIONS%g
s%@USE_RTTI@%$USE_RTTI%g
s%@CXXCPP@%$CXXCPP%g
s%@NOOPT_CXXFLAGS@%$NOOPT_CXXFLAGS%g
s%@REPO@%$REPO%g
s%@NOREPO@%$NOREPO%g
s%@KDE_USE_FINAL_TRUE@%$KDE_USE_FINAL_TRUE%g
s%@KDE_USE_FINAL_FALSE@%$KDE_USE_FINAL_FALSE%g
s%@KDE_USE_CLOSURE_TRUE@%$KDE_USE_CLOSURE_TRUE%g
s%@KDE_USE_CLOSURE_FALSE@%$KDE_USE_CLOSURE_FALSE%g
s%@KDE_CXXFLAGS@%$KDE_CXXFLAGS%g
s%@OBJEXT@%$OBJEXT%g
s%@EXEEXT@%$EXEEXT%g
s%@LN_S@%$LN_S%g
s%@RANLIB@%$RANLIB%g
s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
s%@KDE_PLUGIN@%$KDE_PLUGIN%g
s%@all_includes@%$all_includes%g
s%@all_libraries@%$all_libraries%g
s%@MSGFMT@%$MSGFMT%g
s%@GMSGFMT@%$GMSGFMT%g
s%@XGETTEXT@%$XGETTEXT%g
s%@CPP@%$CPP%g
s%@LIBUTIL@%$LIBUTIL%g
s%@LIBCOMPAT@%$LIBCOMPAT%g
s%@LIBCRYPT@%$LIBCRYPT%g
s%@LIBSOCKET@%$LIBSOCKET%g
s%@LIBRESOLV@%$LIBRESOLV%g
s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
s%@LIBUCB@%$LIBUCB%g
s%@LIBDL@%$LIBDL%g
s%@X_INCLUDES@%$X_INCLUDES%g
s%@X_LDFLAGS@%$X_LDFLAGS%g
s%@x_libraries@%$x_libraries%g
s%@x_includes@%$x_includes%g
s%@LIBSM@%$LIBSM%g
s%@X_PRE_LIBS@%$X_PRE_LIBS%g
s%@LIB_X11@%$LIB_X11%g
s%@LIBXINERAMA@%$LIBXINERAMA%g
s%@QTE_NORTTI@%$QTE_NORTTI%g
s%@LIB_XEXT@%$LIB_XEXT%g
s%@LIBPTHREAD@%$LIBPTHREAD%g
s%@USE_THREADS@%$USE_THREADS%g
s%@KDE_MT_LDFLAGS@%$KDE_MT_LDFLAGS%g
s%@USER_INCLUDES@%$USER_INCLUDES%g
s%@USER_LDFLAGS@%$USER_LDFLAGS%g
s%@LIBZ@%$LIBZ%g
s%@LIBPNG@%$LIBPNG%g
s%@LIBJPEG@%$LIBJPEG%g
s%@qt_libraries@%$qt_libraries%g
s%@qt_includes@%$qt_includes%g
s%@QT_INCLUDES@%$QT_INCLUDES%g
s%@QT_LDFLAGS@%$QT_LDFLAGS%g
s%@MOC@%$MOC%g
s%@UIC@%$UIC%g
s%@UIC_TR@%$UIC_TR%g
s%@LIB_QT@%$LIB_QT%g
s%@kde_qtver@%$kde_qtver%g
s%@TOPSUBDIRS@%$TOPSUBDIRS%g

CEOF
EOF

cat >> $CONFIG_STATUS <<\EOF

# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
  if test $ac_beg -gt 1; then
    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
  else
    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
  fi
  if test ! -s conftest.s$ac_file; then
    ac_more_lines=false
    rm -f conftest.s$ac_file
  else
    if test -z "$ac_sed_cmds"; then
      ac_sed_cmds="sed -f conftest.s$ac_file"
    else
      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
    fi
    ac_file=`expr $ac_file + 1`
    ac_beg=$ac_end
    ac_end=`expr $ac_end + $ac_max_sed_cmds`
  fi
done
if test -z "$ac_sed_cmds"; then
  ac_sed_cmds=cat
fi
EOF

cat >> $CONFIG_STATUS <<EOF

CONFIG_FILES=\${CONFIG_FILES-"Makefile qterm/Makefile qterm/docs/Makefile qterm/docs/en/Makefile qterm/pic/Makefile qterm/cursor/Makefile "}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.

  # Remove last slash and all that follows it.  Not all systems have dirname.
  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
    # The file is in a subdirectory.
    test ! -d "$ac_dir" && mkdir "$ac_dir"
    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
    # A "../" for each directory in $ac_dir_suffix.
    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
  else
    ac_dir_suffix= ac_dots=
  fi

  case "$ac_given_srcdir" in
  .)  srcdir=.
      if test -z "$ac_dots"; then top_srcdir=.
      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
  *) # Relative path.
    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
    top_srcdir="$ac_dots$ac_given_srcdir" ;;
  esac

  case "$ac_given_INSTALL" in
  [/$]*) INSTALL="$ac_given_INSTALL" ;;
"") ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac

  echo creating "$ac_file"
  rm -f "$ac_file"
  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
  case "$ac_file" in
  *Makefile*) ac_comsub="1i\\
# $configure_input" ;;
  *) ac_comsub= ;;
  esac

  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*

# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_uB='\([ 	]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'

if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
  CONFIG_HEADERS="config.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
  case "$ac_file" in
  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
  *) ac_file_in="${ac_file}.in" ;;
  esac

  echo creating $ac_file

  rm -f conftest.frag conftest.in conftest.out
  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
  cat $ac_file_inputs > conftest.in

EOF

# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h.  And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr

# This sed command replaces #undef with comments.  This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF

# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.

rm -f conftest.tail
while :
do
  ac_lines=`grep -c . conftest.vals`
  # grep -c gives empty output for an empty file on some AIX systems.
  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
  # Write a limited-size here document to conftest.frag.
  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
  echo 'CEOF
  sed -f conftest.frag conftest.in > conftest.out
  rm -f conftest.in
  mv conftest.out conftest.in
' >> $CONFIG_STATUS
  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
  rm -f conftest.vals
  mv conftest.tail conftest.vals
done
rm -f conftest.vals

cat >> $CONFIG_STATUS <<\EOF
  rm -f conftest.frag conftest.h
  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
  cat conftest.in >> conftest.h
  rm -f conftest.in
  if cmp -s $ac_file conftest.h 2>/dev/null; then
    echo "$ac_file is unchanged"
    rm -f conftest.h
  else
    # Remove last slash and all that follows it.  Not all systems have dirname.
      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
      # The file is in a subdirectory.
      test ! -d "$ac_dir" && mkdir "$ac_dir"
    fi
    rm -f $ac_file
    mv conftest.h $ac_file
  fi
fi; done

EOF
cat >> $CONFIG_STATUS <<EOF


EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h

exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1

